Advertisement
KNOW YOUR APPLIANCE
USING YOUR SHREDDER
S E T T ING U P T HE S HR E DDE R
1.Remove the shredder from its carton and unwind the cord to its full length.
2.Place the waste bin on a firm level surface in a stable upright position.
3.Take the main shredder unit and put it onto the waste bin
4.Make sure the function switch is in the "OFF"position
5.Connect the plug to the
220-240
V AC mains.
A UT O M O DE
1.To use this mode, turn the function switch to"AUTO".
2.Feed the paper into the paper throat, the shredder will operate to shred the paper.
3.Once all the papers have been shredded, it will stop itself.
O F F M O DE
To switch the shredder off, turn the function switch to the "OFF"position.
R E V E R S E M O DE
1.To switch the shredder to this mode, switch the function switch to "REV"position.
2.The cutting blade in the shredder will run in the reverse direction.
.
PA P E R J A M
1.Turn the function switch to"REV"position to let the cutting blade run in the
reverse direction. The paper will reverse out from the throat.
2.Pull out the paper carefully to clear the throat.
3.Once the jammed paper is removed, turn the function switch to"AUTO"position
for normal operation.
DIS P O S E O F WA S T E
1. Ensure power is off at mains.
2. Dispose of shredder waste.
3. Re-assemble shredder correctly before shredding.
MO T O R O V E R HE AT S A F E T Y D E V IC E
Your shredder is fitted with a safety device that switches off in the unit in event of an
overload. During an overload situation, the unit will stop automatically, and the overheat
protection indicator will light up. Turn the unit off and unplug from the mains. Allow the
motor to cool down to room temperature before resuming operation. If the unit fails to
operate or the safety device switches the unit off again, return the unit.
PRODUCT SPECIFICATION
Model:
S201
Dimension:
315x148x228mm
Net weight:
1.215kg
217mm
Paper entry width:
Duty cycle:
2 min ON 45min OFF
7 Litre
Waste bin volume:
Shred paper capacity:
5sheets
7mm
Shred size:
Noise level:
73 dB around
Voltage:
220-240V~ 50/60HZ
Current:
0.5A
CLEANING
The paper shredder requires regular cleaning.
1.Before cleaning ensure power is switched off at mains and plug has been removed.
2.Clean the outer surface with a soft damp cloth only.
3.Ensure the unit is dry before connect to the mains.
S201
Advertisement
