Table of Contents
Advertisement
8. Carefully lift Oil Reservoir straight up out of the exterior housing by
holding the rim of the bowl. Store in an airtight container. See Tips
for Oil Use and Storage. Oil Reservoir is also dishwasher safe.
WARNING: Do not remove Oil Reservoir until the unit has cooled
and is unplugged.
9. Remove power strip from the interior of the back of the fryer.
10. Remove Condensation Trap from the back of the fryer.
NOTE: This trap will collect any water that has been condensed on
the inside of the Lid when the Lid is opened after frying. Remember
to empty and clean the Condensation Trap after each use. To clean
simply rinse with warm water and dry.
11. The Basket, Lid, Oil Reservoir, Housing and Condensation Trap are
dishwasher safe. Dry all parts thoroughly after cleaning.
12. The Control Panel and Power Strip should never be immersed in water
or other liquids. Gently clean the outer surface of the Control Panel
with a damp cloth containing mild soap solution or plain water.
13. Ensure that both the Lid and Oil Reservoir are completely dry after
washing and before use.
14. Insert the Power Strip back into fryer Housing.
15. Insert Bowl back into housing.
16. Insert Control Panel into front of the unit.
17. Place Basket into Bowl.
18. Put Filters back into Lid and put Cover on.
19. Replace and close lid.
1. Open the Filter Cover and remove filters.
2. Foam White Grease Filter may be washed in hot soapy water. Allow to
air dry.
3. Clean the inside of the cover with a damp soapy sponge. Rinse and
dry thoroughly.
All manuals and user guides at all-guides.com
CARE AND CLEANING (CONT.)
REPLACING AND CLEANING FILTERS
-8-
Advertisement
Table of Contents
