• If the wall mount's fixers are not fixed to the end as shown in the figure, subtle impacts may move the TV. In this
case, make sure to install the fixers properly so that they are fixed to the TV all the way to the end.
~
• To prevent cable damage when dismounting the TV from the wall, disconnect the power cable and the optica
l
cable
before removing the wall mount.
• When removing the TV from the wall, make sure 2 people lift it up together. Do not apply direct force on the display .
............... ............... ....
...................................
:&*:"
...
·,:,:,;~:.;.~:~:~
·
.-.::
·
:;:
-~
...................................
········ ··························
• When you grab the TV to install, remove, adjust the horizontal level, or tilt the wall
mount,
do not apply direct force
on the
display.
• When you handle the TV to install, remove, adjust the horizontal level, or tilt the wall mount, be careful not to
damage any cables.
• Be sure that the TV and wall mount stand are not hit with excessive force after installing the wall mount. The
wall
mount or TV may be damaged or the TV connection with the wall mount device may become unstable. In th is case,
reinstall the wall mount or consult an expert for assistance.
•/
~
-
English 5
-
..,
~
iii
J