Advertisement
Table of Contents
- 1 Configure Full End Panel Support to a Left-Hand or Right-Hand Application
- 2 Primary Desk with Modesty Panel
- 3 Primary Desk with Gussets
- 4 Bridge / Return to Desk
- 5 Bridge and Return Attachment (Continued)
- 6 Support Leg
- 7 Attach a Return or Bridge to a Peninsula Worksurface Using a Support Leg
- 8 Bridge / Return to Corner
- Download this manual
Surpass
®
Failure to install product as instructed, use of hardware other than that which is provided with the product,
or failure to comply with all instructions can result in personal injury.
Illustration 1. Configure Full End Panel Support to a Left-Hand or Right-Hand Application:
Machine screw
Leveler
FREESTANDING DESK APPLICATIONS
WARNING
Attachment bracket
Full end panel support
assembled for left-hand
application
Full end panel support
assembled for right-hand
application
Machine screw
Attachment bracket
Leveler
309-1980
SIDE 1 OF 8 (3/12)
Advertisement
Table of Contents
Related Manuals for Maxon Surpass
Summary of Contents for Maxon Surpass
- Page 1 Surpass ® FREESTANDING DESK APPLICATIONS WARNING Failure to install product as instructed, use of hardware other than that which is provided with the product, or failure to comply with all instructions can result in personal injury. Illustration 1. Configure Full End Panel Support to a Left-Hand or Right-Hand Application:...
- Page 2 2nd - Sheet metal screws (three per side of modesty panel): Install through modesty panel and into full end panel supports. Surpass worksurfaces, full end panel supports, and modesty panels can be configured as freestanding desks. For ease of assembly, assemble unit upside down onto cardboard or a carpeted surface.
- Page 3 2nd - Sheet metal screws (two per gusset): Install through gusset and into full end panel supports. Surpass worksurfaces, full end panel supports, and gussets can be configured as freestanding desks. For ease of assembly, assemble unit upside down onto cardboard or a carpeted surface.
- Page 4 Surpass ® FREESTANDING DESK APPLICATIONS Illustration 4. Bridge / Return to Desk: Illustration 4A. Attach Modesty Panel Bracket: Place primary desk upside down onto cardboard or a carpeted surface. On side of primary desk that bridge or return is to be attached, position modesty panel bracket against interior surface of full end panel support.
- Page 5 Surpass ® FREESTANDING DESK APPLICATIONS Illustration 4. Bridge and Return Attachment (continued): Illustration 4B. Attach Return or Bridge to Primary Desk: Bridge Attachment: Use three sheet metal screws to attach bridge modesty panel to modesty panel bracket (attached to primary desk full end panel support).
- Page 6 Surpass ® FREESTANDING DESK APPLICATIONS Illustration 5. Support Leg: Note: Use desk support legs to: · Attach a bridge to a peninsula (refer to Illustration 6). · Attach a return or bridge to a corner desk (refer to Illustration 7).
- Page 7 Surpass ® FREESTANDING DESK APPLICATIONS Illustration 6. Attach a Return or Bridge to a Peninsula Worksurface Using a Support Leg: Position support leg under peninsula worksurface. Align flat bracket center line locating notch with front edge of peninsula worksurface and rear edge with modesty panel top flange.
- Page 8 Surpass ® FREESTANDING DESK APPLICATIONS Illustration 7. Bridge / Return to Corner: Assemble return desks using support legs under return desk side of worksurface. Use three sheet metal screws to attach a corner desk modesty panel to each support leg.
Need help?
Do you have a question about the Surpass and is the answer not in the manual?
Questions and answers