Table of Content Important Safety Information MIRO & Accessories MIRO Anatomy Basic Operating Instructions MIRO App Product Specifications Customer Care To reduce the risk of injury or damage, keep these safety precautions in mind when setting up, using • and maintaining your robot.
Do not place robot near magnet or magnetic field. • MIRO is designed to operate in normal fresh water environment. To operate MIRO in salt water will immediately void the • warranty. Ornamental skins on the product are consumable. Under normal usage, they can be worn and torn, which does not •...
2. MIRO & Accessories MIRO (1ea) Charging stand for MIRO (1ea) Weight (1~2 ea) Router and charger (1ea) L Wrench(2mm, 1 ea) User Manual http://www.airo.kr...
Before turning power on, be sure to grip robot tightly, otherwise it might fall down onto ground. Turn on power switch clockwise 90˚. When power is on, the robot will start operating in 3 seconds. If the eyeball LEDs are on and off(flickering), then the robot is ready to use. http://www.airo.kr...
Page 7
4. Basic Operating Instructions Operating in the water When you operate MIRO in the water, make sure that the robot can have • enough buoyancy for swimming. Recommended is that before robot's swimming, you shake robot in the • Water tank water for a while to get possibly all the bubbles out of it.
Page 8
Four : More than 95% flickering Red LED Battery Remaining less In Operation Robot on the water surface, flickering than 20% stopping its operation In Operation Battery Dead All off Under Charging Battery Fully Charged Robot on the Charging Stand. http://www.airo.kr...
5. MIRO App MIRO App Installation Process Download MIRO App on either smart-phone or Tablet PC (Android OS only) Install MIRO app on device. Turn on the power of MIRO. Install Router provided together with MIRO. Pair device(Tablet PC or smart-phone) and MIRO over blue-tooth.
Page 10
Press menu button. Mobile Software. • Once you download the file, please open it. Next page will show you how to install MIRO app on your device. • Note AIRO used smart-phone (Android Version 4.2 or above) to create a procedure on next page.
Page 12
5. MIRO App Setting up Router Bluetooth(B/T) Pairing Connect power cable and Click on your device. router. Then, turn on the When main page is on, power of router. press “Manual-control Mode”. Check whether your device’s Press “CONFIRM” for pairing.
Page 13
Automatic Mode Three seconds after the power of MIRO is on, it will automatically operate itself as "Automatic Mode". Auto Mode will not need any device to operate MIRO, which, of itself, will detect obstacles and swim around using four sensors.
Page 14
5. MIRO App Admin Mode You can customize your MIRO App such as changing MIRO App wall paper, company logo, B/T pairing, sensor alarms and etc. On main screen, press “① spot” twice on the right side of logo and right after then press “setting button” (②) once.
3. Battery Charging Method Standing Charging Use Time 10 hours Manual Mode Wireless control using MIRO App (Android OS only) Automatic Mode Operating to avoid obstacles using four sensors 4. Operation Communication Bluetooth 2.4GHz / RF 400Mz (ISM Band) (Mobile App)
Page 17
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the MIRO and is the answer not in the manual?
Questions and answers