Advertisement
OPERATION INSTRUCTIONS
IMPORTANT NOTE: Check your local and state hunting laws for legal and recommended use of
electronic
Game calls.
Turn power on both speaker and remote before using.
NOTE: Remote control buttons are designed to activate command when button is completely pressed
down on
the remote.
Dogg
C atcher
Remote
ATTACHING REMOTE TO SPEAKER
NOTE: Attaching remote to speaker is designed for storage. Primos does not recommend
transporting remote attached to speaker in and out of the field without extra attachment security
protection as remote can be bumped and detach from speaker.
1. Simply align remote with cavity on
side of speaker body. Place
POWER ON/OFF BUTTON [
remote
illuminate.) Press button again to turn POWER OFF.
(Green LED will turn off.)
PLAY SOUND [
desired sound button to play.
speaker LED in upper right corner will flash.
STOP SOUND – Press sound button again to stop sound
at anytime.
upper right corner will flash.
[Dogg Catcher can play two sounds simultaneously.
Follow the Play and Stop instructions above to
operate each individual sound]
PAUSE – Press Pause button to pause a sound while it
is playing.
PLAY – Press Play button to continue playing sound
once it is paused.
VOLUME – Press UP/DOWN volume button at anytime to
select between 10 volume settings.
POWER BUTTON – Standard ON/OFF functionality
RED LED LIGHT – Indicates Speaker power is on.
Located on top center of
] Press to turn Power ON. (Green LED will
12 sound buttons in center of remote]
Note: When signal is sent to speaker LED in
2
Press
Note: When signal is sent to
Advertisement
