Advertisement
Quick Links
1) Place the drawer pedalstal onto a flat surface. Use
adjustable levelers on both sides and ensure even
level.
3) Pull out the bottom drawer until its fully extended
Stanley
Assembly Instructions
2) Place Cabinet on top of the drawer pedalstal. Line
up predrilled holes and use allan key
(provided) to screw in bolts. There are 3 per side.
4) Unlatch the upper side latches on the inside of the
cabinet, then unhinge safety latch and unfold deck
onto the drawer pedalstal.
Advertisement
Summary of Contents for Cabinet Bed Stanley
- Page 1 Stanley Assembly Instructions 2) Place Cabinet on top of the drawer pedalstal. Line 1) Place the drawer pedalstal onto a flat surface. Use up predrilled holes and use allan key adjustable levelers on both sides and ensure even (provided) to screw in bolts. There are 3 per side.
- Page 2 5) Push Tap in on center locking mechanism and 6) Unfold deck all the way until the deck is touching unfold deck support 90 degrees until until you hear a the ground. clicking sound. 7) Pull out mattress fully as shown above. To fold up, reverse steps 3-7.