Advertisement
Figure 1 The S-350 Front Panel
4
5
6
7
1
2
3
8
9
Front Panel
10 Directional Arrows
TRANSPORT
and Remote
4 Play
Starts playback from
the beginning of the
POWER
disc.
1 Power
5 Stop
Switches the S-350
Stops disc playback.
between stand-by and
11 Enter
6 Pause
operational modes.
Temporarily suspends
2 Stand-by and
playback of a track.
Power LED
To resume playback at
Stand-by. The red
the point pause was
stand-by LED
12 Menu
engaged, press play.
illuminates when the
7 Eject
S-350 is switched on
Ejects disc from
from the back panel,
13 Title
transport.
indicating that the
8 Track Forward
player is in the stand-
and Back
by mode and ready to
14 Setup
Selects the track that
be switched to the
follows or precedes
operational mode.
the current track.
Power. The blue
Press repeatedly (do
15 Device Menu
power LED illuminates
not hold) to skip
when the S-350 is in
multiple tracks
the operational mode.
9 Search Forward and
To set up a program.
3 Infrared Sensor
Back
Receives commands
Press to scroll forward
from the S-350 remote
or backward in the
control. For proper
current track. Press
remote control
play (4) to re-turn to
operation, do not
normal playback.
obstruct the infrared
sensor.
2
Krell S-350
Krell
®
is a registered trademark of Krell Industries, LLC, and is restricted for use by Krell Industries, LLC. its subsidiaries, and authorized
®
agents. TosLink
is a trademark of Toshiba Corporation. All other trademarks and trade names are registered to their respective companies.
© 2006 by Krell Industries, LLC, All rights reserved
10
11
12
13
14
15
17
To exit the program
REMOTE ONLY
Press the up, down,
mode. Eject the disc
21 Audio
left, or right arrows to
(7) or press STOP (5)
Selects desired audio
navigate the
and then press PROG
track on DVD
operational menu and
(16) twice.
playback (S-350av).
DVD navigation
16 Prog
22 Subt
choices.
Press PROG to begin
Selects subtitles
programming a
(S-350av).
Press to select
sequence of tracks. If
23 Input
choices from
a disc is playing, press
Selects desired audio
operational menu and
STOP (5) and then
imput drive, optical, or
DVD navigation.
press PROG.
coaxial.
DISPLAY
24 Repeat A/B
Access DVD menu
Loop between 2
(S-350av).
17 Display
predetermined points
Cycles the front panel
within a single track or
display between 4
Selects the active
sequential tracks.
choices: remaining
DVD title (S-350av).
25 Angle
track time, elapsed
track time, elapsed
Selects desired
Basic Setup menu for
time on the disc, and
desired angle on DVD
S-350av.
remaining disc time.
playback (S-350av).
18 Dim
26 Return
Access EV 525
Adjusts the
Returns to the
operational menu.
illumination of the front
previous menu
screen.
panel display (19).
Press PROG (16)
19 Front Panel Display
then enter a track
Shows disc type and
number and press
format, and the
ENTER (11). Repeat
current status of the
until all desired tracks
disc.
are entered. Press
PLAY (4) to begin the
20 Disc Transport
program.
Holds the disc.
Figure 2 The S-350 Back Panel
18
19
27
Figure 3 The S-350 Remote
16
21
22
34
28
29
30
Back Panel
ANALOG AUDIO OUTPUTS
27 L and R Balanced Analog
AudioOutputs
One pair of balanced outputs with
XLR connectors.
28 L and R Single-ended Analog
Audio Outputs
One pair with RCA connectors.
23
DIGITAL AUDIO OUTPUTS
29 Optics Output
One EIAJ fiber optical digital
output with a TosLink connector
30 Coax Output
One S/PDIF coaxial digital output
24
with an RCA connector.
BACK PANEL REMOTE
25
CONNECTIONS
31 12 VDC In/Out
(12 V Trigger)
Out. Sends 12 VDC power on/off
signals to other Krell components
and devices that incorporate a 12
V trigger.
In. Receives 12 VDC power on/off
signals from other components
26
and devices that incorporate a 12
V trigger.
32 RC-5 In
Accepts baseband RC-5 input
commands from hardwired
remote controllers.
33
32
31
35
33 RS-232
The RS-232 communication port
allows you to send and receive
operational instructions to and
from the S-350 via an external
computer control system.
34 Video Outputs (S-350av)
One each: composite video,
s-video, analog component (Y,Pb,
Pr), and HDMI.
POWER
35 Back Panel Power Switch
Use this switch to change the S-
350 from off to stand-by.
35 IEC Connector
Use the provided IEC standard 15
amp power cord.
IMPORTANT
Do not attach enhancement
accessories such as rings, mats,
or dampers to individual discs.
These accessories may interfere
with the disc transport, resulting
in erratic playback and/or poor
sound.
Note
The S-350 incorporates an
advanced suspension system and
does not require additional mass
coupling or isolation. You may
experiment with feet or cones as
long as they are not permanently
affixed to the unit. Any unauthorized
modification to the unit or electronics
voids the warranty.
Krell S-350
3
Advertisement
