Competition Electronics Z86G Operating Instructions

Installation instructions
1. Located the mounting bracket on the installation
place. Keep it horizontal. Mark the hole position
2. Open holes according to the marked position.
Put the screw anchors into the hole.
3. Put the mounting bracket and fasten it with screws.
4. Connect the smart home controller according to the
wiring diagram.
5. Pull down the buckle of the controller and aim to the
mounting bracket. Loose the buckle and the
controller is installed.
Plastic
M o u n ti n
Screw
Notice
After Z86G smart home switch controller binds with indoor
monitor, indoor monitor and cell phones can control the
ON/OFF of light via network connection. For more information
about bind methods and operation, please read the user
manual of indoor monitor.
Switch controller for smart home
t
g b ra c k e
2016-V0113
Operating instructions
Security Technology Vogue
Security Technology Vogue Innovation
Innovation