Advertisement
Laser Mode Cut: Pango will analyse the image edge and scale and fill
it with vector line. Can be used for the simple logo or vector file
engraving.
Laser Mode Carve: Pango will transform the image into bitmap. Can
be used for photogragh engraving.
Bright Threshold: The cutting mode will transform the colored picture
into black and white. The bright threshold value will set the
demarcation of the black and while.
Reversed Bright: Reverse the black and white.
Infill Rate: Infill rate of the laser cutting mode.
Infill speed: Engraving speed of the laser cutting mode.
14
Advertisement
