Download Print this page

Advertisement

Quick Links

http://www.e2a.net
Easy-809 EU G2 Manual
Easy2Access A/S Easy-809 EU G2 Fingerprint lock
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Easy-809 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Easy Access Easy-809

  • Page 1 Easy-809 EU G2 Manual Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 2 When one long beep is heard, the user is enrolled successfully. If three beeps are heard, and the red LED flashes three times, the user enrollment fails. Notes: Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 3 * (star) + 123 + ADD (red LED flashes one time and green LED flashes three times) + 01 (green LED flashes one time)+ 123456 + * (green LED flashes one time)+ 123456 + * Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 4 1) Other PIN codes can be enrolled with no need to restart the process as soon as one PIN code is enrolled. If you want to quit, just press any non-numeric button at the outside Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 5: Changing Pin Codes

    User PIN code is deleted successfully. If the red LED flashes one time following any of the above operations, the deletion fails. Please check it and repeat the previous operation steps. Note: Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 6 Enter #3 (green LED flashes one time) + Administrator PIN code + # (red LED flashes one time and green LED flashes three times) + 2 When the green LED turns on and one long beep is heard, the lock is on PIN code & Fingerprint Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 7 2) Under this condition, the lock is completely dead no matter any button is entered at the outside unit. 3) This condition will last 3 minutes once it starts. Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 8: Quick Arming

    EU809 Operations on the Inside Unit Key IR: : : : Arming the Infra-Red alarm system Quick Arming Press down on Key IR and hold it for 2 seconds until a long beeping is heard and Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 9 When the down counting finishes, the outside turn knob will enter into the Unlocking Mode and be locked again in 3 seconds. After then the lock will send out the arming signal to the Non-Infra-red alarm system. Easy2Access A/S Easy-809 EU G2 Fingerprint lock...
  • Page 10 Key R on the navigation wheel as well. When both the red and green LED turn on, and two long beeps are heard, the lock has been successfully reset. Easy2Access A/S Easy-809 EU G2 Fingerprint lock...