Advertisement
Wireless microphone manual
Pi Electronics Inc.
Name: Wireless Microphone
Model: PX100
1、Turn off the tail pipe and put two No. 5 batteries (2X 1.5V) into the battery
compartment. Pay attention to the positive and negative polarity of the batteries.
2、Press the switch button and the microphone turns on. At this time, the display will
display the current frequency and battery power.
3、Under the boot state, press the switch key, then the screen will display the
character "OFF" and then turn off.
4、Under the boot state, the frequency of the microphone will change when the
frequency key is pressed.
Advertisement
Table of Contents
Summary of Contents for PI PX100
- Page 1 Wireless microphone manual Pi Electronics Inc. Name: Wireless Microphone Model: PX100 1、Turn off the tail pipe and put two No. 5 batteries (2X 1.5V) into the battery compartment. Pay attention to the positive and negative polarity of the batteries. 2、Press the switch button and the microphone turns on. At this time, the display will display the current frequency and battery power.
- Page 2 Microphone working frequency PX100 Frequency Frequency 570.0 585.0 570.5 585.5 571.0 586.0 571.5 586.5 572.0 587.0 572.5 587.5 573.0 588.0 573.5 588.5 574.0 589.0 574.5 589.5 Display 575.0 590.0 575.5 590.5 Power 576.0 591.0 576.5 591.5 Button 577.0 592.0 577.5 592.5...
- Page 3 FCC Warning: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
Need help?
Do you have a question about the PX100 and is the answer not in the manual?
Questions and answers