Download Print this page

Wallflower Smart Monitor WFA001 Installation Manual

For 3-wire & 4-wire stoves, compatible with apple iphone and google android

Advertisement

Quick Links

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
Conforms to UL Std. 498A
any interference received, including interference that may cause undesired operation.
Cert. to CSA Std. C22.2 No. 42
CAN ICES-3 (B)/NMB-3(B)
For disconnecting use only.
Contains Transmitter CC32xx Module
FCC ID: Z64-CC3200M0DR1
IC ID: 451I-CC3200M0DR1
5008908
© 2017 Wallflower Labs Inc. or its affiliates. All rights reserved. Wallflower, the Wallflower logo, and the Wallflower Smart Monitor are trademarks of Wallflower Labs Inc.
or its affiliates, registered in the U.S. and other countries. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
Google, Google Play and Android are trademarks of Google Inc., registered in the U.S. and other countries. The Android robot is reproduced or modified from work
created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. Patent pending.
Wallflower Smart Monitor
Installation Guide
For 3-Wire & 4-Wire Stoves
Wallflower Smart Monitor™ is compatible with
Apple iPhone® and Google Android™
Smart Monitor (3-wire) and Smart Monitor (4-wire) shown above

Advertisement

loading

Summary of Contents for Wallflower Smart Monitor WFA001

  • Page 1 5008908 © 2017 Wallflower Labs Inc. or its affiliates. All rights reserved. Wallflower, the Wallflower logo, and the Wallflower Smart Monitor are trademarks of Wallflower Labs Inc. or its affiliates, registered in the U.S. and other countries. Apple, the Apple logo, and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.
  • Page 2 Resetting To Factory Default After setting up your Wallflower Smart Monitor using the App, if resetting to factory default settings is ever required, simply cycle your circuit breaker OFF and ON per the following: 1. Turn OFF circuit breaker 2. Turn ON circuit breaker, wait 5 seconds 3.

This manual is also suitable for:

Smart monitor wfa002