1. Introduction The LX-S3 is a waterproof 3” motorcycle speaker with specification v4.0 Bluetooth supporting A2DP stereo, FM Radio & 100W power amplifier built inside the housing. You can stream the stereo music wirelessly from the Bluetooth mobile phone, or USB audio source.( Note: only compatible with USB 3.0 below 32 GB)
Page 5
Step 1: Mount each speaker with its clamp to the handlebar of the motorcycle. Note: Different size handlebar please insert different slot of the bracket as below. Step 2: Plug the speaker connector of the main speaker to the slave speaker.(Fig.①) Note: Please remember the two arrows on each connectors should be on one line.
Page 6
Step 3: Connect the RED power wire to the positive of the motorcycle battery, and BLACK wire to the negative. Then plug in the power cable to the main speaker.(Fig.②) Step 4: Connect the external antenna to the main speaker antenna connector.(Fig③) Step 5: Find a place to locate the antenna with 3M adhesive on the motorcycle, and extend the external antenna for FM reception when used.
4.4 Pairing a Mobile Phone - Power on the LX-S3, there will be voice prompt “Bluetooth Mode”, and the LED light on the speaker will blink blue to enter pairing mode; -Search for Bluetooth devices on your mobile phone. The speaker will be listed on your mobile phone as “LX-S3”;...
Need help?
Do you have a question about the LX-S3 and is the answer not in the manual?
Questions and answers