Genius
Wireless Mouse
NS-6005
Model:
GM-120030/S for NS-6005
GM-130001/S for NS-6015
GM-130002/S for NS-6010
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install one AA or AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
Note:
When you put the receiver into the storage slot, the power switch will turn off.
You cannot use the mouse when the receiver is inside the mouse.
Battery life may vary based on user and computing
conditions.
Factory Settings
Left Button: Provides traditional mouse functions like
1.
click, double click and drag.
Magic-Roller: Press the "Magic-Roller" to surf the
2.
Internet and Windows documents.
Right Button: Provides traditional mouse click
3.
functions.
Warning: (Troubleshooting)
Do not use the wireless optical/laser mouse on a desk
1.
which is made of glass or mirror.
The connection of the wireless device is factory preset, so when you plug the
2.
USB receiver into any USB port, the connection between the micro receiver and
the mouse will be established automatically.
In case your PC did not install the hardware successfully, remove the micro
3.
receiver from the USB port and go Human Interface Devices under Device
English
NS-6010
NS-6015