Page 1
ANT+ CONSOLE ICG PART NO:320-00-00001-01 PN NO:1000317935 ZMD NO:ZMD4001580 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 2
320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 3
FCC COMPLIANCE & ADVISORY STATEMENT 1. Reorient the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.
1 Year Warranty: ANT+ Console. The warranty becomes effective on the date of original installation Batteries are excluded from any warranty. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
PARTS INCLUDED A. X1 B. X2 C. X2 TOOLS REQUIRED...
Page 6
ASSEMBLY The use of rechargeable batteries may lead to malfunction of the console unit due to a voltage lower than 1,5 V. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 7
TECH SPECS & FEATURES TECHNICAL SPECIFICATIONS: • Wireless (ANT+) data transmission. • Compatible with analog Polar® heart rate devices (intergrated Polar® heart rate receiver). • Supports ANT+ chest belts. • Display background illumination (5 sec.). • Simple operation via “SUN” and “FLOW” buttons. TRAINING FEATURES: •...
• Keep one button pressed while inserting batteries into the ANT+ console to enter maintenance mode. • Press “SUN” button to display software version. • Press “SUN” button to enter ANT+ RPM pairing mode. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 9
BASIC SETTINGS • Press “FLOW” button to start ANT+ RPM pairing. (Put the console as close as possible to the transmitter and provide RPM signal during the pairing process). As soon as a RPM signal is displayed, pairing of ANT+ RPM transmission is finished. Proceed with basic settings process: •...
• Test if the ANT+ console properly reads and displays your HR signal transmitted from your personal HR chest belt (analog chest belts will be paired automatically; ANT+ chest belts must be paired manually). 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 11
BEFORE YOU START PROCESS FOR ANT+ HEART RATE PAIRING: • Press “SUN” button for 3 seconds to enter pairing mode. • Press “FLOW” button to start ANT+ HR pairing (Get as close as possible to the ANT+ console during ANT+ HR pairing). •...
The display will shift from Time, to Distance, to Kcal and finally to Scan. If you select the scan mode the display will alternate between Time, Distance, Kcal. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 13
HOW TO OPERATE WARNING! Heart Rate monitoring systems may be inaccurate. Over-exercising may result in serious injury or death. If you feel faint stop exercising immediately. Heart Rate - average Heart Rate actual Cadence/RPM - average Cadence/RPM -actual Training Information Distance Scan functionality for time, distance...
• Press any button on the front of the ANT+ console for at least 10 seconds. • After RESET reinsert the (new) batteries. • Test the functionality of the ANT+ console before re-attaching it to its support bracket. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 15
BATTERY EXCHANGE BATTERY EXCHANGE AND RESETTING OF CADENCE TRANSMITTER: To change the batteries of the cadence transmitter or to reset the cadence transmitter, please proceed as follows: • Use a screw driver to remove the cadence transmitter from the bike/KRANKcycle frame. •...
Page 16
ANT+ console. If you come into contact with residue, avoid contact with eyes and wash hands thoroughly. 320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...
Page 17
BATTERY EXCHANGE If possible, please use rechargeable batteries to help save the environment. When doing so, please make sure they deliver 1,5 V output. Before disposing of the console, please take the batteries out. Signed products or batteries with this symbol may not be disposed of in normal domestic refuse.
Page 18
320-00-00001-01-v1.1 | Copyright by Indoor Cycling Group GmbH 2017 | www.indoorcycling.com...