Factory Reset; Firmware Upgrade; Changing Music Mode - MobiFren Sound Master MFB-H7100 User Manual

7) Waiting a call and put a call on hold
- This feature allows you to put a call on hold during conversation and answer a waiting call.
- Give the a long press (press approximately 1 second) to put an active call on hold and answer a waiting
call.
- Give the a long press to switch between two calls
- Just press shortly to end a call.

4. Factory Reset

➜ ➜ ➜
Press
initialize the headset. Please pair the headset again after factory reset

5. Firmware Upgrade

 Firmware upgrade is availabe at our homepage when there's performance upgrade or additional functions.
Please connect MFB-H7100 to PC by charging cable while pressing
goes to firmware upgrade mode.
※ Do not disconnect the headset from PC during firmware upgrading.
It may cause malfunction or damage to the headset.
※ After firmware upgrade, the headset becomes initialization automatically.

6. Changing Music Mode

 There are 6 kinds of music modes in MFB-H7100.
You can change mode in basic music mode.
While playing music, if you press
Mode will be changed in order. (EQ is not available at speaker mode)
 MSTS™ Tuning technology together with lossless compression codec apt-X & AAC codec enables you to
enjoy not only MobiFren sound but similar sound of various kinds of famous high end earphones and you
can select it as your preference. Now you will enjoy the music with the optimum sound quality like as CD in
wireless.
buttons in order , then press ⊚ button till purple LED glitters. Then, you can
button and
button. Then, red LED blinks and it
or button at the same time for 1 second, the Music
- 8 -