Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Dedicated Sound and Audio ONSIA Sound Art
- Page 1 Loudspeaker ®...
-
Page 2: Limitation Of Liability
English LIMITATION OF LIABILITY DEDICATED SOUND AND AUDIO AND ITS AFFILIATES DO NOT MAKE ANY GUARANTEES, EXPRESSED OR IMPLIED, INCLUDING MERCHANT ABILITY AND FITNESS FOR PURPOSE, WITH RESPECT TO ANY OF THESE SUGGESTIONS OR INSTRUCTIONS. DEDICATED SOUND AND AUDIO SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR... - Page 3 English CHARGING Connect wall charger to speaker circuit using USB cable.Speaker LED will light RED color when charging and will indicate GREEN color when fully charged. Disconnect wall charger cable when fully charged.
-
Page 4: Operation
English OPERATION 1/ Turn on each OSA1620ST amplifier by pressing POWER key for approximately one second. Amplifier LED’s will light on both amplifiers. 2/ Press and hold the CONNECT key for approximately three seconds on one OSA1620ST amplifier. Its LED will blink. Repeat this process for second amplifier. - Page 5 English 5/ Press the OSA1620ST amplifier POWER key for approximately one second on the amplifier/speaker you prefer connect to first. This OSA1620ST amplifier’s LED will begin blinking. 6/ You can now discover OSA1620ST ID on your Bluetooth enabled phone or device. Select OSA1620ST from devices list for pairing and connecting. The OSA1620ST LED will stop blinking.
-
Page 6: Troubleshooting
English TROUBLESHOOTING If your Bluetooth Sound Art loudspeaker appears to have a problem, the following notes may help. If the problem still persists after having attempted to resolve it, consult your dealer for assistance or contact ONSIA technical support through www.onsia.com or by calling the number under the Warranty Information section. -
Page 7: Warranty Information
In the event of a defect, Dedicated Sound and Audio will, at its option, repair or replace the product with no charge to the purchaser for parts or labor. The repaired or replaced product will be warranted for 90 days from the date of return shipment, or for the balance of the original warranty, whichever is longer. - Page 8 FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Need help?
Do you have a question about the ONSIA Sound Art and is the answer not in the manual?
Questions and answers