3-6
b.
CAUTION: Marring the front cover O-ring sealing area will prevent the radio from
!
sealing properly.
NOTE
Flexible ribbon circuits (flexes) connecting the front cover assembly and the chassis
prevent you from completely separating the two units. Display radios and radios with
option boards have two flexes.
6.
Lay the chassis down. Rotate the front cover backward and slightly away from the chassis.
7.
Lift the latches on the main circuit board to release the flexes from their connectors.
Slowly pry the bottom of the chassis from the cover by pushing the small flat-blade
screwdriver down, or chassis opener (6680702Z01) and rotating the handle of the tool
over and behind the base of the radio. This prying action forces the thin inner plastic wall
toward the base of the radio, releasing the two chassis base tabs.
Radio Chassis
Figure 3-3 Chassis Removal
Figure 3-4 Unlatch Flex Connectors
Latches
Flex Connectors
MAINTENANCE