Sorenson Pulse Setup Manual

Hide thumbs

Sorenson Pulse

Setup Guide

Model: ADWAS-1986

Table of Contents

• Take Inventory ............................................................................. 2

• Connect the Equipment ............................................................. 3

• Safety Instructions ...................................................................... 5

• Regulatory Compliance ............................................................. 6

Version 1.0

April 19, 2018

Part No: 770-00002

Sorenson Confidential - Do Not Distribute Without Permission

Table of Contents

Need help?

Do you have a question about the Pulse and is the answer not in the manual?

Questions and answers

Summary of Contents for Sorenson Pulse

Page 1 Table of Contents • Take Inventory ................2 • Connect the Equipment ............. 3 • Safety Instructions ..............5 • Regulatory Compliance ............. 6 Version 1.0 April 19, 2018 Part No: 770-00002 Sorenson Confidential — Do Not Distribute Without Permission...
Page 2 The DC Power Supply (transformer) is a black rectangular device with an integral power cord that you will attach to the power port on the back side of the Pulse device. Do not use any other transformer with the Pulse device.
Page 3 Find a good place to put the Pulse device. Look around for a good place to set up your Pulse device. You’ll need a stable table, counter, or shelf that’s located near an available AC power outlet. Because the Pulse device connects wirelessly to the ntouch VP2 videophone (or other ntouch endpoint), you do not need to place the device near the videophone.
Page 4 Choose a light intensity setting for both the LightRing and the Alert Flasher lights. Move the two switches on the back of the Pulse device to adjust the lights to the desired setting. Each switch has four positions: Off, Low, Medium, High The High setting is located nearest to the Radio pairing button.
Page 5 To make sure that using your Pulse alert device is a safe and pleasant experience, please take the time to read, fully understand and follow each of these safety instructions: • The Pulse device is to be used only with the included power supply. Do not use any other power supply with the device.
Page 6 All Sorenson product packaging materials may be recycled. When the Pulse device is no longer needed, its plastic and metal parts may be recycled. Please check with local resources for information on how to properly dispose of the components of your Sorenson Pulse device.

This manual is also suitable for:

Adwas-1986