Table of Contents
Advertisement
Resetting the Projector
If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select
Image menu settings:
Open the Image
menu . . .
You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:
1. Press the
2. Open the
3. Do one of the following:
■
Select
You should reset the lamp timer only when you install a new projector lamp. See
page 55 for more information.
■
Select
■
Select
Component, Save Memory, Language, and Lamp).
44
Making Detailed Adjustments
, and confirm as needed. The example below shows how to reset the
Reset
button on the remote control.
Menu
menu.
Reset
Reset Lamp Hours
to clear all memory settings.
Reset Memory
to return all projector settings to their original defaults (except
Reset All
to clear the lamp usage timer and reset it to zero.
and select Reset
Advertisement
Table of Contents
