Advertisement
Step 7. Once you have
secured the seat and aligned
it properly to the bowl.
Tighten the nut to the screw
using a Phillips head
screwdriver and your hand or
a wrench (optional). Make
sure that it is secure.
Step 10. Re-install the toilet seat by
holding the seat and lid while pressing
the seat onto the post until it snaps into
place.
2014 | Icera USA | St. Thomas Creations
Step 8. Now that the toilet seat
is secure and in place, we need
to install the seat caps covers.
To remove the toilet seat, press
the 2 buttons located on the
seat hinge (see the arrows) and
lift upwards.
www.icerausa.com
Step 9. Take the 2 chrome
seat cap covers and placed
them over the seat post. Do
not use any type of sealant
on these caps.
Step 11. Enjoy the comfort of your
Icera / St. Thomas Creations toilet.
| ww.stthomascreations.com
Advertisement
