Hydro Crunch 6 INCH 2 SPEED CLIP FAN Instruction Manual

Table of Contents

Download this manual

Enlarged version

IMPORTANT!

The following pages contain important safety and operating instructions. Please

INSTRUCTION MANUAL

read and follow all instruction in this manual. Carefully read and review all safety

instructions, warnings and cautions contained in this manual. Failure to read and

6 INCH 2 SPEED CLIP FAN

follow these instructions, warnings and cautionary statements may result in severe

injury or death to persons and pets or damage to personal property.

Do not dispose product or any other part of it as unsorted municipal waste –

instead it shall be handed over to the applicable collection point for the recycling of electrical

and electronic equipment.

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARD INSTRUCTIONS

Table of Contents

Do you have a question about the 6 INCH 2 SPEED CLIP FAN and is the answer not in the manual?

Page 1 Carefully read and review all safety instructions, warnings and cautions contained in this manual. Failure to read and 6 INCH 2 SPEED CLIP FAN follow these instructions, warnings and cautionary statements may result in severe injury or death to persons and pets or damage to personal property.
Page 2 If the product will not work after you have read the troubleshooting guide and practiced the troubleshooting reduce the risk of fire, electrical shock and injury to persons, including the options, you are advised to return the Hydro Crunch™ product to the retailer you purchased it from. The dealer following: will be able to examine the product and test its components.
Page 3 MAIN SPECIFICATIONS The use of such devices may create a fire hazard. Rated Voltage: 120V 10. NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has Rated Frequency: 60Hz been dropped or damaged in any manner. There are no user serviceable parts. Return Fan to an Rated Power: authorized service facility for examination, electrical or mechanical adjustment or repair.
Page 4 PARTS DIAGRAM 4. The fan can be adjusted through 360 degrees on its central pillar (see fig 5) 1 Front Guard 5. The fan can be adjusted through 45 degrees vertically (see fig 4) 2 Fan Blade 6. The fan can be clipped to flat boards (see fig 3) 3 Rear Guard TO ADJUST HEAD ANGLE: Loosen Knob under Fan Head.