Pioneer LD-V4300D Service Manual page 67

@ Part numbers of the playe r control IC a nd the
mode control IC (CONT assembly IC2 )
Displays the part numbers of ICl and IC2 being used,
followed by 'OK' for correct ROM data or 'NG' for
incorrect ROM data.
• Table 4 shows the functions and operations of each part in the service mode.
Operation
Function
LD-V4300D Remote controller
OPEN
Press the [OPEN/CLOSE] key in the
Press the [REPEAT MODE
stop mode.
(REPEAT
Bl]
key.
Press the [OPEN/CLOSE] key in the
Press the [REPEAT A] key.
STOP
play mode.
Press the [REJECT] key in the play
mode.
PLAY
Press the [TV/LOP] key.
Video and audio are ON.
Press the [PLAY] key in the stop mode.
Tracking is OPEN.
Press the [PLAY] key in the stop mode.
Press the [PLAY] key during
Press the [CX] key in the play mode.
STILL
TRACKING OPEN in the play mode.
Press the [PLAY] key during
TRACKING OPEN in the play mode.
Press the [STEP FWD] key in the play Press the [STEP FWD] key in the play
TRACKING OPEN
mode. mode.
Press the [PLAY] key in the play mode. Press the [PLAY] key in the play mode.
Press the [STEP REV] key in the play Press the [STEP REV] key in the play
mode. mode.
TRACKING CLOSE
Press the [PLAY] key during Press the [PLAY] key during
TRACKING OPEN in the play mode.
TRACKING OPEN in the play mode.
SLIDER IN Press the [SCAN REV] key. Press the [SCAN REV] key.
SLIDER OUT Press the [SCAN FWD] key. Press the [SCAN FWD] key.
TILT SERVO OFF Press the [SPEED DOWN] key.
TILT SERVO ON Press the [SPEED UP] key.
TILT DECREASE & SERVO OFF
Press the [SKIP REV] key.
TILT INCREASE & SERVO OFF Press the [SKIP FWD] key.
S B