Related Manuals for Connected IO ER2500T-**-CAT1 series
Summary of Contents for Connected IO ER2500T-**-CAT1 series
- Page 1 EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 Emu Router User Manual: ER2500T-XX-CAT1 Rev: V3.0 March 2018 Connected IO Inc., CONFIDENTIAL...
- Page 2 EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 Revision History: Date Rev No. Description 03-28-2018 V1.0 Initial draft 03-29-2018 V2.0 Removed Section 7.4 03-29-2018 V3.0 Added “Professional Install” sections 7.4.1 & 7.4.2 Connected IO Inc., CONFIDENTIAL...
-
Page 3: Table Of Contents
Firmware Upgrade Modem 5.1. AT Command 5.2. APN Change LOGS 6.1. System LOG 6.2. Kernel LOG Antenna 7.1. Detachable Antennas 7.2. Detachable Antenna Guidelines 7.3. Antenna – Installation Guidelines 7.4. Professional Antenna Installation 7.4.1. Professional Installation Instructions Connected IO Inc., CONFIDENTIAL... - Page 4 Instructions d’installation Professionnelle Environmental 8.1. Operating Environment 8.2. Physical Parameters Approvals and Certifications 9.1. Manufacturing 9.2. North American Certifications 9.2.1. ER2500T-NA-CAT1 & ER2500T-VZ-CAT1 9.2.2. ER2500T-NA-CAT1 9.2.3. ER2500T-VZ-CAT1 9.3. FCC General Warning 9.4. Industry Canada (IC) Notices Connected IO Inc., CONFIDENTIAL...
-
Page 5: Introduction
Revision: 3.0 1. Introduction Connected IO Inc’s., Emu Router is a 4G router offering CAT1 connectivity for M2M applications. The Emu router includes a 4G modem with an embedded host processor based on the Mediatek MT7620A SoC which also supports 802.11 b/g/n WiFi functionality. The 4G connectivity is made by an operator certified LTE module. - Page 6 LED: Solid Green for Link, Flashing Green for Traffic Number Item Description WiFi Antenna SMA connector for WiFi Antennas (NOT Reverse Polarized) Cellular Antennas SMA connector for both Primary and Diversity Antenna Ports WiFi LED, Orange: Wifi is connected/Off: No WiFi Connected IO Inc., CONFIDENTIAL...
-
Page 7: Radio Configurations
On login page, you can just click the Login icon to enter the GUI as shown in Figure Figure 1. Default password is “password”, it is recommended that a it is recommended that a new password be created under Web GUI System under Web GUI System- >Administration page. Connected IO Inc., CONFIDENTIAL... - Page 8 GUI, the overview page The EMU Router overview is available page includes important messages such as system status and and memory information as shown in Figure 2. ER2500T-VZ Figure 2: Overview Page Connected IO Inc., CONFIDENTIAL...
-
Page 9: Setup New Ip
EMU Router User Manual: ER2500T EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 3.2. Setup New IP Select Network->Interfaces as shown in as shown in Figure 3. Connected IO Inc., CONFIDENTIAL... - Page 10 EMU Router User Manual: ER2500T EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 ER2500T-VZ Figure 3: Network List Select LAN and click “Edit” from from Figure Connected IO Inc., CONFIDENTIAL...
- Page 11 Figure 4: Interface Overview Enter the new IP address in the “IPv4 address” filed, the new IP address in the “IPv4 address” filed, and then click the “Change” icon ” icon in the bottom- right corner in Figure Connected IO Inc., CONFIDENTIAL...
- Page 12 After the new IP setup, scroll down to the bottom of the page and scroll down to the bottom of the page and press “Save & Apply” Apply” as shown in Figure Figure 6: Save the New Setting Connected IO Inc., CONFIDENTIAL...
-
Page 13: Connecting To The Wifi
GUI is up the user should see the EMU Router overview with WiFi Connection information the EMU Router overview with WiFi Connection information as shown as shown in Figure 9, Wireless Information. ER2500T-VZ Figure 9: Wireless Information Connected IO Inc., CONFIDENTIAL... -
Page 14: System Maintenance
EMU Router configuration to your configuration to your computer, and how to restore that same configuration that same configuration later if needed. This can be done by selecting System > Backup/ System > Backup/Flash Firmware: ER2500T-VZ Figure 10: System List Connected IO Inc., CONFIDENTIAL... -
Page 15: Backup The Configuration
7. Device will write the stored configuration back to flash then reboot the system Device will write the stored configuration back to flash then reboot the system Device will write the stored configuration back to flash then reboot the system. Connected IO Inc., CONFIDENTIAL... -
Page 16: Reset To Factory Default Under Web Gui
NOTE: It is important NOT to power off the device before the entire process is completed NOTE: It is important NOT to power off the device before the entire process is completed. Figure 8: Reset to Default Connected IO Inc., CONFIDENTIAL... -
Page 17: Firmware Upgrade
Administrators can PING the device after the upgrade process is completed to ensure that the device is programmed and rebooted successfully. to ensure that the device is programmed and rebooted successfully. ER2500T-VZ Figure 9: Firmware Upgrade Connected IO Inc., CONFIDENTIAL... -
Page 18: Modem
EMU Router User Manual: ER2500T EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 ER2500T-VZ Figure 10: Firmware Upgrade 5. Modem Select Network -> Modem as shown > Modem as shown Figure ER2500T-VZ Figure 11: Modem Page Connected IO Inc., CONFIDENTIAL... -
Page 19: At Command
Figure ER2500T-VZ Figure 13: APN Change If you would like to check whether whether the APN setting is successful, pleases enter AT command eases enter AT command “AT+CGDCONT?” See Figure ER2500T-VZ Figure 19: Check APN Function Connected IO Inc., CONFIDENTIAL... -
Page 20: Logs
EMU Router User Manual: ER2500T EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 6. LOGS 6.1. System LOG Select Status -> System Log ER2500T-VZ Figure 21: System Log 6.2. Kernel LOG Select Status -> Kernel Log ER2500T-VZ Figure 14: Kernel Log Connected IO Inc., CONFIDENTIAL... -
Page 21: Antenna
1. Installation personal This product is designed for specific application and needs to be installed by a qualified personal who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. Connected IO Inc., CONFIDENTIAL... -
Page 22: Instructions D'installation Professionnelle
Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. 8. Environmental 8.1. Operating Environment Connected IO Inc., CONFIDENTIAL... -
Page 23: Physical Parameters
This device has been tested and conforms to the PTCRB testing standards which confirms that this cellular product operates within a defined global and industry specification and meets the minimum level of Network performance required by PTCRB operator Member networks. 9.2.3. ER2500T-VZ-CAT1 Connected IO Inc., CONFIDENTIAL... -
Page 24: Fcc General Warning
M2M application usually resides inside other equipment where the end-user cannot change the external antennas easily. There is no doubt that the antennas can be replaced by the end-user once installed in the final configuration. Connected IO Inc., CONFIDENTIAL... -
Page 25: Industry Canada (Ic) Notices
The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized. This device has also been evaluated and shown compliant with the IC RF Exposure limits under mobile exposure conditions. (antennas are greater than 20cm from a person's body). Connected IO Inc., CONFIDENTIAL... - Page 26 Antenna Manufacturer Part No. Peak Gain Type LTE: 698-960MHz/1710-2170MHz/2500-2960MHz 0.7 dBi Max / 3.8 dBi Max / 3.2 dBi Max GTT Europe LTD OA-LTE-01-01-GT Omni-Dipole WiFi: 2400MHz-2500MHz 3.1 dBi Max Connected IO Inc., CONFIDENTIAL...
- Page 27 EMU Router User Manual: ER2500T-XX-CAT1 Revision: 3.0 ========== End of Document ========= Connected IO Inc., CONFIDENTIAL...
Need help?
Do you have a question about the ER2500T-**-CAT1 series and is the answer not in the manual?
Questions and answers