Risk Reduction; Symbols In This Manual; Know Your Product; Symbols On The Product - Ryobi One+ Easy Starter Original Instructions Manual

■ Hazards associated with the starting of the outdoor
petrol-powered product. Ensure that you read and
fully understand the warnings and instructions in the
operator's manual for the product you are intending to
start. Pay particular attention to fuel safety, breathing
of exhaust fumes, and contact with moving blades or
cutters.

RISK REDUCTION

It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
■ If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor.
WARNING
Injuries maybe caused, or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 6.
1. F/R switch
2. Starter bit port
3. Starter bit
4. Safety interlock pin
5. Start button
6. Battery (not included)
7. Battery latch
8. Charger (not included)

SYMBOLS ON THE PRODUCT

Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Choose the starter bit type to match
with the shape of the icon beside the
EasyStart port on the petrol engine.
Insert the starter bit with the matching
shape facing outwards from the One+
easy starter. Slide the F/R switch to show
the same shape. Turn the exposed bit by
hand to ensure it rotates in one direction
only.
4
Insert the One+ easy starter into the port
on the engine. Make sure it is a good fi t to
properly engage the interlock pin.
Release the start button and remove the
One+ easy starter from the engine.
Depress the start button for less than 4
4
seconds each time until the engine starts.
Wait a few seconds between attempts.
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your Local Authority or
retailer for recycling advice.

SYMBOLS IN THIS MANUAL

Wear eye, ear, and head protection.
Wear non-slip, heavy-duty gloves.
Parts or accessories sold separately
Warning
Note
The following signal words and meanings are intended to
explain the levels of risk associated with this product:
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.