Advertisement
1
PARTS REQUIRED: Headboard, Footboard, 4 Legs
Step 1: Attach the legs to the bottom of the footboard. Then, attach the legs
to the bottom of the headboard.
3
A
PARTS REQUIRED: Headboard, Footboard, Assembled Side Rails
Step 3: Attach the Headboard to the assembled side rails using the bolts
provided on both sides. Repeat for the Footboard.
5
H
PARTS REQUIRED:
Center Support Rails,
Horizontal Support Rail
Step 5: Attach the center support
rail with the bolts provided.
A
F
DRAWINGS FOR ILLUSTRATION ONLY
C
WRONG
B
DRAWINGS FOR ILLUSTRATION ONLY
B
C
DRAWINGS FOR ILLUSTRATION ONLY
2
PARTS REQUIRED: Left & Right Side Rails, Horizontal Support Rail
Step 2: Assemble the left side rails by joining the two left side rail pieces in the
center to the horizontal support rail using the bolts provided. Assemble the right
side rails by joining the two right side rail pieces in the center to the
horizontal support rail using the bolts provided.
• NOTE: Make sure the pre-assembled wood slat support pieces are toward the
top of the side rails so the slats can rest evenly.
4
CORRECT
E
G
PARTS REQUIRED: Center Support Rails, U-bracket, Bolts
Step 4: Attach the two center support rails in the middle with the U-bracket &
bolts provided.
• NOTE: There are two U-brackets for the King and California King sizes.
6
A
PARTS REQUIRED: Straight Slats
Step 6: Place the straight slats on top, and enjoy your new bed frame!
B
D
C
D
DRAWINGS FOR ILLUSTRATION ONLY
DRAWINGS FOR ILLUSTRATION ONLY
DRAWINGS FOR ILLUSTRATION ONLY
B
C
J
I
Advertisement
