User’s Manual of AWCL-300-6P-Series 1 Introduction Description AWCL-300-6P-Series are that one is simple and apt to operate general purpose RGB LED Controller. This controller besides can be regarded as a LED dimmer that supported IR-remote control interface, having offered and built-in six programs.
Page 3
User’s Manual of AWCL-300-6P-Series 2 Introduction Connection Diagram AWCL-300-6P-Audio-DMX Connection diagram: AWCL-300-6P-Audio-DMX AWCL-300-6P-Audio-DMX Vled (12/24V)(+) Vled (12/24V)(+) DC_GND (-) DC_GND (-) Line-In Line-In (Optional) (Optional) DMX- DMX- DMX+ DMX+ Vled (+) Vled (+) Green Green Blue Blue IR-Remoter IR-Remoter DMX- DMX- DMX+ DMX+...
Page 4
User’s Manual of AWCL-300-6P-Series AWCL-300-6P-Audio Connection diagram: AWCL-300-6P-Audio AWCL-300-6P-Audio Vled (12/24V)(+) Vled (12/24V)(+) DC_GND (-) DC_GND (-) Line-In Line-In (Optional) (Optional) Vled (+) Vled (+) Green Green Blue Blue IR-Remoter IR-Remoter The Connector diagram of AWCL-300-6P-Series : (Top View) Vled : The connector of LED’s power supply which is based on the LED Module.
Page 5
User’s Manual of AWCL-300-6P-Series (Side view) Vled : The connector of LED’s power supply which is based on the LED Module. (DC 12V/24V)。 : The connector of the Blue LED 。 (cathode of Blue LED module) : The connector of the Green LED 。 (cathode of Green LED module) : The connector of the Red LED 。...
Page 7
User’s Manual of AWCL-300-6P-Series : System Power switch. When System power is off, then there is some current existed。(<20mA) : Pause the program when the P1 ~ P6 play。Toggle pause and play。 : Switch the Jump/Fade mode when P1 ~ P6 play。Toggle Jump and Fade。 : Adjust the Jump/Fade speed of P1 ~ P6。There are 24 various speed option。...
Page 8
User’s Manual of AWCL-300-6P-Series → → → : Fade/Jump Program 1。Red 100 % Red 100 %+Green 100 % Green 100 % → → → … Green 100 %+ Blue 100% Blue 100 % Red 100 %+ Blue 100% Red 100 % →...
Page 9
User’s Manual of AWCL-300-6P-Series 3 Appendix The Accessory of AWCL-300-6P-Series for Audio Line-in。 AWCL-300-6P-Series Application Notes: Jumper #1 : The Option Jumper of Vled and DC-in . That is Shorted in factory set. i.e. Vled and DC-in used same power source,and the Voltage ranged is 12VDC~24VDC 。...
Need help?
Do you have a question about the AWCL-300-6P Series and is the answer not in the manual?
Questions and answers