Table of Contents
Advertisement
Once a PakSense Ultra Wireless Label has been read and is stored in the Ultra Wireless Reader, it
will not be re-read. To re-read a label, the label must be cleared from the Ultra Wireless Reader
memory. To clear the memory on the Ultra Wireless Reader, refer to Clearing the Reader
Memory on page 15.
After all of the detected PakSense Ultra Wireless Labels have been downloaded, a listing of label
serial numbers appears.
Display Label Information
To view a downloaded label, scroll to the label serial number, highlight it, and press the select
button.
Once a label serial number is selected, a summary page will appear as depicted below.
The following information is available on the summary screen:
o Label Serial Number
o Maximum temperature reached (Max)
o Minimum temperature reached (Min)
o Average temperature of all temperature reads from the end of the "Cool down" period to
when the label was read. (Avg)
o Alert: High Low
PakSense Ultra Wireless Label User Manual Revised November 21, 2008
- 7 -
Advertisement
Table of Contents
