Bluetooth Pairing And Connection; Optical Digital Audio In Operation - DBPOWER SBB-70759 User Manual

- Press the Vol+ or Vol- buttons to adjust volume.
- Press the BASS button on remote control repeatedly to set bass level.
- Press the TREBLE button on remote control repeatedly to set treble level.
NOTE: Both BASS and TREBLE button have seven levels of adjustment with 0 as the
default. A single press sequentially gives +1, +2, +3, -3, -2, -1 and back to 0.
standby mode.

BLUETOOTH PAIRING AND CONNECTION

1. Power on the unit as previously explained.
2. Press the STANDBY/SOURCE button on the unit or press the SOURCE button
3. Power on the external Bluetooth enable device and enter Bluetooth mode and try
searching the unit.
6. During playback:
- Press the or
- Press the button on remote control to pause, press it again to resume.
NOTE: The unit will be automatically connected with the last paired Bluetooth device
if their Bluetooth function are activated and they are in working range.
OPTICAL DIGITAL AUDIO IN
1. Connect the Optical out jack from the external audio player (such as TV, DVD
player etc.) to the OPTICAL IN jack on the rear of the unit with the optical
connection cable as illustated below:(For PCM format only)
button on remote control to skip tracks.
8
2018.03
.08
19:40:2
5
+08'00'