Operating Information And Tips - urban drivestyle Unimoke V2 Manual

General operating manual
To ride your UNIMOKE, follow these steps:
1. Insert the key into your battery and turn key into ON position
2. Press LONG on the central START button on your controller panel. The display will come alive and the battery status and drive level 1.
3. Select your drive level (1-9), LOW assist to HIGH assist
4. Use LONG press on "+" to switch on the light or to switch it off.
5. Use LONG press on "-" to activate the 6 km/h push assistance.
6. Engine power will gradually increase as you start to pedal and will cut off at the cut-off speed of 25 km/h.
WARNING!
!
Please practice with your UNIMOKE before going on public roads!
Get practice with the controls, brakes, different drive levels and the specific handling characteristics of an EPAC before
riding on public roads. ONLY take cargo or children with you after being fully confident with your UNIMOKE and its
behaviour!
Especially practice full stops and manoeuvres at different speeds and situations.
16