Gadgetree 8034816 Operating Instructions

DANCING WATER SPEAKER
Operating Instructions
NOTE: Turn the volume to the minimum level before connecting the speakers.

DESCRIPTION

A. 40mm speaker
B. Speakers' connect cable
C. Audio input jack
D. Mini USB port
E. 3.5mm audio input jack
F. Audio cable
G. Mini USB cable

CONNECTING THE SPEAKERS

1. Connect the left speaker to the right speaker
using the included connect cable

BUTTON FUNCTION:

TROUBLESHOOTING

The Dancing Water Speakers consists of a two-piece multimedia speaker system featuring a controllable fountain effect button. If you experience
problems after installing your new speakers, refer to the following information:
1. No sound–Check the stereo mini plug connection and turn the connector slightly to ensure proper contact. Make sure that the USB plug is connected
properly. Also, make sure sound is coming from your audio device.
2. Sound is too high/low–adjust the volume on the audio device, or press the volume buttons on the speaker.
3. Sound cuts out–check all connections to ensure proper contact. Unplug the USB power and restart your media program. Adjust the volume settings
on your media program. If this does not work, restart your computer.
4. Buzzing–check stereo mini plug connection and turn connectors slightly to ensure proper contact.
5. Howling/feedback–turn down the volume or move the speakers further away from your microphone. You can also turn off the microphone. To do this
refer to the owner manual that comes with your PC or audio device.
6. Laptop battery failure–when using with a laptop PC, we suggest plugging in your laptop power supply to save battery life.
2. Connect the left speaker and your computer with the USB power cable
3. Connect the left speaker and the portable player with 3.5mm mini plug cable
8034816