Download Print this page

Viking Flush Mount Trim User's Installation Manual page 2

Professional & designer oven accessory. ddoe double oven, veso single oven

Advertisement

Removing Existing Trim
Removing Existing Trim
Remove the existing side trim pieces from the oven. There should be one trim piece on each
side of the oven.
DDOE
Double Oven
For Professional ovens, there will be a trim piece at the top and bottom of the oven that will
need to be removed. Also, on the Professional ovens, the door will need to be removed prior
to removing the lower vent trim and putting on the new trim.
NOTE: Keep the screws that are left after removing the existing side trim pieces. These
screws will be used to install the flush mount accessory trim pieces.
VESO
Single Oven
2
3

Advertisement

loading