Page 2
If any items are missing or damaged, contact your • Remove all packaging from the appliance and accessories. nearest Tesco store for assistance. Please have your receipt ready Retain the packaging. If you dispose of it, do so according to any when you call.
Page 3
Your appliance and its accessories FLOOR CLEANING ASSEMBLY Handle Steam Trigger Power Cord On/Off Switch Handle* Steam Trigger* Floor Head Clamp Lever Solution Tank Cap Solution Tank Attachment Hook Upper cord cleat Lower cord cleat Handle Release Water Tank Cap Water Tank Floor Head Solution Tank Switch...
Page 4
Assembling Your Cleaner for Cleaning Floors Attaching the Handle and the Floor Head There is a peg in the handle stem. Line up the peg in the stem with the hole in the cleaner housing and push it in. The peg will click into place securing the handle.
Cleaning Floors Upright Recline Preliminaries • Attach the proper accessory to the floor head. Hard Floors: Cleaning pad. Carpets: Cleaning pad and carpet glider. • Solution Tank: in the OFF position to prevent leakage. Always have the solution tank switched off when the cleaner is not in use. •...
Page 6
Using the Cleaner in Hand-Held Mode Preparation: Make sure the cleaner is cool, unplugged from the mains supply and that the On/Off switch is OFF. Remove the handle and floor head to operate the cleaner as a hand-held device. Detach the carpet gilder (if used) Release the power cord and detach the stem from the cleaner.
Operating the Accessories Switch off and unplug the cleaner before filling with water. • Only use enough steam to accomplish the task. The steam will last longer and the surface cleaned will get less hot. Attach the desired accessory (see previous page) •...
If a fault develops during this period, please If your appliance does not appear to be working effectively, contact the Tesco help line on 0800 323 4060 (free from BT land- please use the checklist below before contacting Tesco: lines) or 0330 123 4060 (from mobiles).
Need help?
Do you have a question about the SM16 and is the answer not in the manual?
Questions and answers