Step 3:
Line up the Handle (Item #13) with the upper two pre-drilled holes on the upper outside
portion of the legs (short side of the cart.)
Attach the handle to the Cart Legs (Items #10 & 11) using 1/4" Split Washers (Item
#15) and 1/4-20 x1/2" Screws (Item #14) inserted from the outside of the leg – Use
two washers and two screws per leg. Repeat on the other side of the cart.
Line up the two Equipment Hooks (Item #12) with the lower two pre-drilled holes
(below the attached handle.)
Attach the hooks to the Cart Legs (Items #10 & 11) using 1/4" Split Washers (Item
#15) and 1/4-20 x1/2" Screws (Item #14) inserted from the outside of the leg – Use
two washers and two screws per leg. Repeat on the other side of the cart.
Bella Grande Series Owner's Manual ©Forno Bravo, October 2018
8