Installation - Behringer EUROLIVE B212XL User Manual

6
5.3 Stereo operation with a subwoofer
Using a crossover, the main output signal of a mixing console is
split into a stereo signal and a mono signal. The mono signal
covers the lower frequency range and the stereo signal covers all
other frequency ranges. Then, the stereo signal is connected to a
stereo power amplifier. A B212XL/B215XL is connected to each
of the amp outputs. The mono subwoofer signal is connected to
one channel of an additional power amplifier, which powers one
EUROLIVE VP1800S subwoofer.
Fig. 5.3: Stereo operation with a subwoofer
EUROLIVE B212XL/B215XL User Manual
6.

Installation

The EUROLIVE B212XL/B215XL features professional speaker
connectors that assure problem-free operation. The connector
was developed for loudspeakers with high power ratings. If it is
connected into the corresponding plug, it locks into place and
cannot accidentally be disconnected. It protects against electric
shock and assures correct polarity. Each of the plugs only carries
the assigned individual signal.
Fig. 6.1: Professional speaker connector
Please use only commercially available cables to connect your
loudspeakers to the power amp. Verify the pin assignment of
your loudspeakers and cables depending on the loudspeaker
output you are using.
Fig. 6.2: ¼" TS connector