Setting The Alarm - HoMedics Deep Sleep Revitalize HDS-3000 Instruction Manual

5. Short press "CLOCK" to confirm. The minutes will begin flashing.
6. Press volume +/- or track
7. Short press "CLOCK" to confirm. The clock is now set.
NOTE: To exit clock setting mode at any time, either long press the "CLOCK" button or wait for 10
seconds.

SETTING THE ALARM

Deep Sleep Revitalize has 2 alarm settings so you can set 2 different wake-up times. When
®
setting each alarm, you'll set the alarm time and corresponding wake sound and volume.
1. Long press the alarm 1
2. Press volume +/- or track
through the hours to choose between AM or PM.)
3. Short press the alarm 1
4. Press volume +/- or track
5. Short press the alarm 1
6. Press volume +/- or track
7. Short press the alarm 1
8. Press volume +/- or track
9. Short press the alarm 1
10. Repeat for alarm 2 if desired.
When the alarm sounds you may:
• SNOOZE: Press the "SNOOZE" button. Your sleep time will be extended by 10 minutes.
• RESET: Turn the alarm off by touching the play/pause
The alarm clock will automatically reset for the next day in its current mode. The alarm bell
icon will remain displayed to indicate the alarm is set.
to choose the minutes.
/
button. 12:00 AM will flash on the screen.
to choose the hour. (In the 12-hour format, continue cycling
/
button to confirm. The minutes will begin flashing.
to choose the minutes.
/
button to confirm. "SOUND" will begin flashing.
to choose a wake sound.
/
button to confirm. "VOLUME" will begin flashing.
to choose the volume.
/
button to confirm. Alarm 1 is now set.
8
button on the front of the device.