Summary of Contents for Gainstrong Oolite V3.5
- Page 1 Communicate with the sincere and open world!! MT7628DAN Core Module Oolite V3.5_Module _SPEC_EN Specification Version V1.0.2 Author：James June 12, 2018 GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 2 Communicate with the sincere and open world!! Revision Date Contents of Revision Change Remark 1.0.0 2018-03-28 First release James 1.0.1 2018-03-28 Update pictures James 1.0.2 2018-03-28 Add Pins Map James GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 3 Communicate with the sincere and open world!! INTRODUCTION Oolite V3.5 is powerful, reliable,easy to use and with extremely small size(23.7mm x 23.7mm x 2.7mm).Low power consumption so can use on IOT device. MT7628DAN with 580/575 MHz MIPS 24KEc with 64 KB I-Cache and 32 KB D-Cache.
- Page 4 Antenna: 2 × IPEX external antenna(default) or use the stamp hole pins interface UART(Debug): serial debugging interface has lead out. Power supply voltage: 3.3V Size: 23.7mm x 23.7mm x 2.7mm (without shield) GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 5 Communicate with the sincere and open world!! (MT7628DAN) UNCTIONAL LOCK IAGRAM GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 6 Communicate with the sincere and open world!! PICTURES GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 7 Communicate with the sincere and open world!! ECHANICAL Length Width Height (without shield) 23.7mm 23.7mm 2.7mm (Tolerance:±0.2mm) (Tolerance:±0.2mm) (Tolerance:±0.2mm) GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
-
Page 8: Pin Definition
10/100 PHY Port #0 TXP Exposed ground pad MDI_TP_P1 SD-XC/eMMC/GPIO#14 MDI_TN_P1 SD-XC/eMMC/GPIO#15 Note: IPD : Internal pull-down IPU : Internal pull-up I : Input O : Output IO : Bi-directional GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn... - Page 9 Exposed ground pad MDI_RP_P2 SD-XC/eMMC/GPIO#18 MDI_RN_P2 SD-XC/eMMC/GPIO#19 MDI_TP_P2 SD-XC/eMMC/GPIO#20 MDI_TN_P2 SD-XC/eMMC/GPIO#21 MDI_TP_P3 SD-XC/eMMC/GPIO#22 MDI_TN_P3 SD-XC/eMMC/GPIO#23 MDI_RP_P3 SD-XC/eMMC/GPIO#24 MDI_RN_P3 SD-XC/eMMC/GPIO#25 MDI_RP_P4 SD-XC/eMMC/GPIO#26 MDI_RN_P4 SD-XC/eMMC/GPIO#27 MDI_TP_P4 SD-XC/eMMC/GPIO#28 MDI_TN_P4 SD-XC/eMMC/GPIO#29 Exposed ground pad USP_DP USB port0 data pin Data+ GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 10 Port#3 activity LED/GPIO#40/JTAG_CLK EPHY_LED4_N_JTRST_N Port#4 activity LED//GPIO#39/JTAG_TRST_N Exposed ground pads PCIE_TXN0 PCIe0 differential transmit TX - PCIE_TXP0 PCIe0 differential transmit TX + PCIE_RXP0 PCIe0 differential transmit RX + PCIE_RXN0 PCIe0 differential transmit TX - GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
- Page 11 UART1 Lite RXD/GPIO#46 I2S_SDI I2S data input/GPIO#0 I2S_SDO I/O,IPD I2S data output/GPIO#1 I2S_WS I2S word select/GPIO#2 I2S_CLK I2S clock/GPIO#3 I2C_CLK I2C clock/GPIO#4 I2S_SD I2C Data/GPIO#5 WiFi ANT1 WiFi ANT1 Exposed ground pad WiFi ANT1 WiFi ANT2 GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn...
-
Page 12: Reflow Profile Guideline
3. MTK would recommend customer following the solder paste vendor’s guideline to design a profile appropriate your line and products. 4. Appropriate N2 atmosphere is recommended since it would widen the process window and mitigate the risk for having solder open issues. GainStrong Industry Co.,Ltd. http://www.gainstrong.cn Tell:+86-755-81720165 support@gainstrong.cn... - Page 13 Modular installation instrucations WIFI Module -OoliteV3.5 Integrates high-speed GPIO and peripheral interface.Please pay attention to the installation direction (pin direction). FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules.
- Page 14 ATTENTION This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users 2) This device and its antenna(s) must not be co‐located with any other transmitters except in accordance with FCC multi‐transmitter product procedures.
Need help?
Do you have a question about the Oolite V3.5 and is the answer not in the manual?
Questions and answers