Navigation System; Destination Input; Manual Destination Input; Country Input - BMW 116i 2011 Owner's Handbook Manual

Navigation*

Navigation system

General
The navigation system can determine the pre‐
cise position of the vehicle by means of satellites
and vehicle sensors and guide you reliably to any
specified destination.
Navigation data is saved in the vehicle and can
be updated.
Inputs when the vehicle is stationary
Only enter data when the car is stationary,
and always obey the traffic regulations and road
signs in the event of any contradiction between
the traffic situation and the instructions given by
the navigation system. You could otherwise
commit an offence and put vehicle occupants
and other road users at risk.◀
Call up navigation system
1. Press the button on the controller.
2. "Navigation"
The navigation system can also be directly
called up with the button on the controller.

Destination input

Manual destination input

General
When you are entering a town/city or street
name, the system supports you with automatic
name completion and input matching, see
page 20.
Saved town/city and street names can be called
up quickly.
▷ You can skip input of the country, town or
city if you wish to retain previous inputs.
▷ If only the town/city has been entered, route
guidance to the town/city centre is started.
138
Online Edition for Part no. 01 40 2 607 643 - 07 11 490

Country input

1. "Navigation"
2. "Destination input"
3. Select "Country" or the country displayed.
Entering a town/city
1. Select "City/Postcode" or the town/city dis‐
played.
2. Select letters, if applicable.
The list is gradually narrowed down with
each input.
3. Tilt the controller to the right.
4. Select the name of a town/city from the list.
If there are several places with the same name:
1. Move to the list of place names.
2. Highlight the town/city.
3. Select the town/city.
Entering the postcode*
1. Select "City/Postcode" or the town/city dis‐
played.
2. Select the symbol.