Summary of Contents for Maro DI600
- Page 2 • MARO as manifacturer will not be responsible for any quality or malfunction issue caused by quality of the feed water. • Damage of loss sustained through any natural or manmade causes beyond the control of Maro D'Italia , including but not limited to fire, Oscillating and pulsating wash mode earthquake, floods, etc.
- Page 4 Cause ELECTRONIC TOILET SEAT NAME Seat temperature is not warm Is seat temperature set on low or is it Reset the seat temperature on a DI600 MODEL enough during usage. turned off? higher setting. Seat Seat temperature is too high.
- Page 5 Technical Drawings Troubleshooting FREQUENTLY ASKED QUESTIONS 385mm Please read the following questions carefully and refer to the instructions. If the product still does not work, contact your local sales dealer 136mm or dial the service call for help. 140~180mm TIPS: If there is water leakage, immediately turn off the water, pull out the power plug and switch off the power supply of the appliance. The following reasons may cause the product's working failure: 1.
- Page 6 Safety precautions Removal Use the specified power supply Do not loose outlets. This might AC 220V-240V/50Hz only. Never cause a fire or an electrical shock. put too much pressure on the electrical outlet. This may cause a fire or overheating. If the power cord does not suffice, please buy a professional power extension cord.
- Page 7 Safety precautions T-joint cleaning and filter replacement Make sure replacement, repair or Do not expose the product to T-valve filter cleaning removal of the product is carried direct sunlight. This might cause out by a qualified service person discoloration or skin injury due to only.
- Page 8 Before installation Cleaning 1. Do not put the product in a room where humidity can exceed 90% RH (relative humidity). 2. Only use specified power supply (AC 220V–240V). Other power supply may cause product failure or product damage. 3. Do not apply power or supply water to the unit until the installation process is complete. 4.
- Page 9 Installation The Users setting After the remote control power, the user 1 and 2 of the parameters of the user as the default parameters, the user by user 1, the parameters will be switched to the user 1 original parameters, while the modified parameters will be recorded to the user 1.
- Page 10 Installation Nozzle cleaning Press the “Nozzle Clean” button and the nozzle will extend to clean itself automatically. You can also choose to clean the nozzle by yourself. Manual cleaning The washing procedure can be ended by pressing the “Stop” button or by waiting for 120 seconds until the nozzle retracts itself.
- Page 11 Installation Dryer operation and night light Dryer operation High temperature Medium temperature Slide up to remove the remote control. Low temperature Normal temperature Slide down to put the remote control back to Press the “Stop” button to stop; The function will stop automatically in the initial position.
- Page 12 Installation Seat temperature control 5th grade 4th grade 3rd grade 2nd grade 1st grade Normal temperature Burn protection 180 seconds after the user is seated, the control system reduces the seat temperature automatically, to prevent being burned.
- Page 13 Installation Auto mode Power supply connection IPress the power switch. The light turns on (meaning the power is on as well). Press the button to start the “Auto mode”, it will complete wash oscillating and dry functions in automatic order. Leakage protection test Press the leakage test button.
- Page 14 Installation Oscillating and pulsating wash mode Functionality test Oscillating Cleaning Seat sensor Press the button to start oscillating. Press again to stop. On Wash/Bidet Mode. In order to check if the nozzle works well, press the “Seat sensor” position with your hand.
- Page 15 List of installaton parts Wash / Bidet operation Cover Inlet Hose Display Press the “Stop” button to stop; The washing procedure will be automatically stopped after 3 minutes or when you leave the seat. T-valve Filter Power Water temperature setting Filter I-ECO Wash Button...
- Page 16 Slide Buttons Overview Remote control overview Wash Button Power IR Receiver Bidet Button Stop Button Wash Button Bidet Button Bidet / Wash Setting Auto Button Dryer Button Wash Pressure Button“-” Pressure Button“+” Air Temperature Button Seat Temperature Button Bidet Water Temperature Button Forward Button Backward Button Press the “Wash”...
Need help?
Do you have a question about the DI600 and is the answer not in the manual?
Questions and answers
How to set seat on eco mode? ALL THE TIME IS HEATING.