1. Manuals
  2. Brands
  3. BCM Advanced Research Manuals
  4. Control Unit
  5. ESM-KBLH
  6. User manual

BCM Advanced Research ESM-KBLH User Manual

7th gen intel core processor i7/i5/i3 type6 come basic module with intel qm175 chipset
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ESM-KBLH
7th Gen Intel Core ™ Processor i7/i5/i3 Type6 COMe Basic
Module with Intel® QM175 Chipset
User's Manual
st
Ed – 30 August 2017
1
Copyright Notice
Copyright  2017 ALL RIGHTS RESERVED.
Part No. E2047289000R

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ESM-KBLH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BCM Advanced Research ESM-KBLH

  • Page 1 ESM-KBLH 7th Gen Intel Core ™ Processor i7/i5/i3 Type6 COMe Basic Module with Intel® QM175 Chipset User’s Manual Ed – 30 August 2017 Copyright Notice Copyright  2017 ALL RIGHTS RESERVED. Part No. E2047289000R...
  • Page 2 We assume no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or masks work rights to these products, and makes no representations or warranties that 2 ESM-KBLH User’s Manual...
  • Page 3 ESM-KBLH User’s Manual these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Applications that are described in this manual are for illustration purposes only. We make no representation or warranty that such application will be suitable for the specified use without further testing or modification.

  • Page 4: Table Of Contents

    2.4.2.1.12 USB Signals ........................28 2.4.2.1.13 I2C Signals ........................28 2.4.2.1.14 COM.0 Pins Signals ....................... 28 2.4.3 COM Express Connector 2 (CN1B) ....................29 2.4.3.1 Signal Description – COM Express Connector 2 (CN1B) ............33 2.4.3.1.1 USB3.0 Signals ........................33 4 ESM-KBLH User’s Manual...
  • Page 5 ESM-KBLH User’s Manual 2.4.3.1.2 PEG Signals ........................33 2.4.3.1.3 DDI Signals .......................... 33 3.BIOS Setup ........................34 Introduction ......................35 Starting Setup ......................35 Using Setup ......................36 Getting Help ......................37 In Case of Problems ....................37 BIOS setup ......................38 3.6.1...
  • Page 6 4. Drivers Installation....................... 96 Install Chipset Driver ....................97 Install Display Driver ....................98 Install LAN Driver (For Intel I219LM) ............... 99 Install ME Driver ....................101 Install Serial IO Driver .................... 102 5. Mechanical Drawing ....................103 6 ESM-KBLH User’s Manual...

  • Page 7: Getting Started

    1.2 Packing List Before you begin installing your single board, please make sure that the following materials have been shipped: 1 x ESM-KBLH COMe Module  1 x Driver/Utility DVD-ROM  5 x Screws ...

  • Page 8: Document Amendment History

    ESM-KBLH User’s Manual 1.3 Document Amendment History Revision Date Comment August 2017 Initial Release 8 ESM-KBLH User’s Manual...

  • Page 9: Manual Objectives

    We strongly recommend that you study this manual carefully before attempting to set up ESM-KBLH series or change the standard configurations. Whilst all the necessary information is available in this manual we would recommend that unless you are confident, you contact your supplier for guidance.

  • Page 10: System Specifications

    LVDS (via eDP-to-LVDS): 1920 x 1080 @60Hz VGA (via DP-to-VGA): 1920 x 1080 @60Hz Active 3 Display Combinations : IBL#567387 rev 1.1 page 74 Display1 Display2 Display3 Multiple Display HDMI VGA* HDMI HDMI HDMI HDMI HDMI 10 ESM-KBLH User’s Manual...
  • Page 11 Standard: 0 to 60C Storage Temp. -40°C to 75°C Operating Humidity 0% ~ 90% relative humidity, non-condensing Size (L x W) 125 mm x 95 mm Weight 0.44lbs(0.2kg) Note: Specifications are subject to change without notice. ESM-KBLH User’s Manual 11...

  • Page 12: Architecture Overview-Block Diagram

    ESM-KBLH User’s Manual 1.6 Architecture Overview—Block Diagram The following block diagram shows the architecture and main components of ESM-KBLH. Resistor select eDP toLVDS eDP/LVDS DDI 1 CH7511B Switch DP to VGA DDI 3 RTL2168 DDI 3 2 x DDR4 2400/2133MHz 260P...

  • Page 13: Hardware Configuration

    ESM-KBLH User’s Manual 2. Hardware Configuration ESM-KBLH User’s Manual 13...

  • Page 14: Product Overview

    ESM-KBLH User’s Manual 2.1 Product Overview 14 ESM-KBLH User’s Manual...
  • Page 15 ESM-KBLH User’s Manual ESM-KBLH User’s Manual 15...

  • Page 16: Installation Procedure

    6. Enter the BIOS setup by pressing the delete key during boot up. Use the "Save & Exit \ Restore Defaults" feature. 7. If TFT panel display is to be utilized, make sure the panel voltage is correctly set before connecting the display cable and turning on the power. 16 ESM-KBLH User’s Manual...

  • Page 17: Main Memory

    ESM-KBLH User’s Manual 2.2.1 Main Memory ESM-KBLH provides two 260-pin SODIMM socket, supports up to 32GB DDR4 2400/2133 SDRAM SODIMM Make sure to unplug the power supply before adding or removing DIMMs or other system components. Failure to do so may cause severe damage to board and components.
  • Page 18 (2) Static electricity can damage the electronic components of the computer or optional boards. Before proceeding, ensure that you are discharged of static electricity by briefly touching a grounded metal object. 18 ESM-KBLH User’s Manual...

  • Page 19: Connector List

    (Reserved for BIOS programming) 5 x 2 header, pitch 2.00mm BIOS_SPI1 CN1A COM Express connector 1 COM Express connector 2 CN1B SODIMM1 260-pin DDR4 SDRAM DIMM socket SODIMM2 260-pin DDR4 SDRAM DIMM socket AT/ATX mode selector ESM-KBLH User’s Manual 19...

  • Page 20: Setting Jumpers & Connectors

    ATX mode  *Default 2.4.1.1 Signal Description –AT/ATX mode selection AT/ATX mode Description AT mode Auto-power on, no need to press Power button to enable power on/off ATX mode Press the power button to enable power on/off 20 ESM-KBLH User’s Manual...

  • Page 21: Com Express Connector 1 (Cn1A)

    A21 B21 SATA2_TX+ SATA3_TX+ A22 B22 SATA2_TX- A23 B23 SATA3_TX- SUS_S5# A24 B24 PWR_OK SATA2_RX+ A25 B25 SATA3_RX+ SATA2_RX- A26 B26 SATA3_RX- BATLOW# A27 B27 SATA_ACT# A28 B28 HDA_SYNC A29 B29 HDA_SDI1 HDA_RST# A30 B30 HDA_SDI0 ESM-KBLH User’s Manual 21...
  • Page 22 CB_RESET# A51 B51 PCIE_TX5+ A52 B52 PCIE_RX5+ PCIE_TX5- A53 B53 PCIE_RX5- GPI0 A54 B54 GPO1 PCIE_TX4+ A55 B55 PCIE_RX4+ PCIE_TX4- A56 B56 PCIE_RX4- GPO2 A57 B57 PCIE_TX3+ A58 B58 PCIE_RX3+ PCIE_TX3- A59 B59 PCIE_RX3- A60 B60 22 ESM-KBLH User’s Manual...
  • Page 23 A81 B81 LVDS_B_CK+ LVDS_A_CK-/EDP_TX3- A82 B82 LVDS_B_CK- LVDS_I2C_CK/EDP_AUX+ A83 B83 LVDS_BKLT_CTRL LVDS_I2C_DAT/EDP_AUX- A84 B84 +ATX5VSB GPI3 A85 B85 +ATX5VSB KBRST# A86 B86 +ATX5VSB CB_EDP_HDP A87 B87 +ATX5VSB PCIE_CLK_REF+ A88 B88 BIOS_DIS1# PCIE_CLK_REF- A89 B89 VGA_RED A90 B90 ESM-KBLH User’s Manual 23...
  • Page 24 A101 B101 FAN_PWMOUT SER1_RX FAN_TACHIN A102 B102 LID# A103 B103 SLEEP# +VIN_9V_19V A104 B104 +VIN_9V_19V +VIN_9V_19V A105 B105 +VIN_9V_19V +VIN_9V_19V A106 B106 +VIN_9V_19V +VIN_9V_19V A107 B107 +VIN_9V_19V +VIN_9V_19V A108 B108 +VIN_9V_19V +VIN_9V_19V A109 B109 +VIN_9V_19V A110 B110 24 ESM-KBLH User’s Manual...

  • Page 25: Signal Description - Com Express Connector 1 (Cn1A)

    2.4.2.1.3 PCI Express Signals Signal Signal Description PCIE_TX[0:6] +/- PCI Express Differential Transmit Pair 0-6 PCIE_RX[0:6] +/- PCI Express Differential Receive Pair 0-6 Reference clock output for PCI Express lanes 0-6 and for PCI Express Graphics PCIE0_CK_REF+/- lanes 0-15 ESM-KBLH User’s Manual 25...

  • Page 26: Flat Panel Lvds Signals

    Module High Module SPI0/SPI1 BIOS_DIS1# Carrier Module Module High Module Module Carrier SPI0 Carrier SPI0/SPI1 Carrier Module SPI1 Module SPI0/SPI1 2.4.2.1.7 GPIO Signals Signal Signal Description GPI[0:4] General purpose input pins. GPO[0:4] General purpose output pins. 26 ESM-KBLH User’s Manual...

  • Page 27: Power Signals

    Management Interrupt) or to wake the system. SUS_STAT# Indicates imminent suspend operation. PWR_OK Power OK from main power supply SYS_RESET# Reset button input. Active low input. WAKE0# PCI Express wake up signal. WAKE1# General purpose wake up signal. ESM-KBLH User’s Manual 27...

  • Page 28: Sata Signals

    I2C_CLK General purpose I2C port clock output. I2C_DATA General purpose I2C port data I/O line. 2.4.2.1.14 COM.0 Pins Signals Signal Signal Description SER0/1_TX TTL level outputs from the Module. SER0/1_RX TTL level inputs from the Module. 28 ESM-KBLH User’s Manual...

  • Page 29: Com Express Connector 2 (Cn1B)

    C19 D19 PCIE_TX6+ PCIE_RX6- C20 D20 PCIE_TX6- C21 D21 PCIE_RX7+ C22 D22 PCIE_TX7+ PCIE_RX7- C23 D23 PCIE_TX7- DDI1_HPD C24 D24 C25 D25 C26 D26 DDI1_PAIR0+ PEG_GEN3_RESTE# C27 D27 DDI1_PAIR0- C28 D28 C29 D29 DDI1_PAIR1+ C30 D30 DDI1_PAIR1- ESM-KBLH User’s Manual 29...
  • Page 30 C51 D51 PEG_RX0+ C52 D52 PEG_TX0+ PEG_RX0- C53 D53 PEG_TX0- TYPE0# C54 D54 PEG_LAN_RV# PEG_RX1+ C55 D55 PEG_TX1+ PEG_RX1- C56 D56 PEG_TX1- TYPE1# TYPE2# C57 D57 PEG_RX2+ C58 D58 PEG_TX2+ PEG_RX2- C59 D59 PEG_TX2- C60 D60 30 ESM-KBLH User’s Manual...
  • Page 31 C79 D79 PEG_TX8- C80 D80 PEG_RX9+ C81 D81 PEG_TX9+ PEG_RX9- C82 D82 PEG_TX9- C83 D83 C84 D84 PEG_RX10+ C85 D85 PEG_TX10+ PEG_RX10- C86 D86 PEG_TX10- C87 D87 PEG_RX11+ C88 D88 PEG_TX11+ PEG_RX11- C89 D89 PEG_TX11- C90 D90 ESM-KBLH User’s Manual 31...
  • Page 32 PEG_RX15+ C101 D101 PEG_TX15+ PEG_RX15- PEG_TX15- C102 D102 C103 D103 +VIN_9V_19V C104 D104 +VIN_9V_19V +VIN_9V_19V C105 D105 +VIN_9V_19V +VIN_9V_19V C106 D106 +VIN_9V_19V +VIN_9V_19V C107 D107 +VIN_9V_19V +VIN_9V_19V C108 D108 +VIN_9V_19V +VIN_9V_19V C109 D109 +VIN_9V_19V C110 D110 32 ESM-KBLH User’s Manual...

  • Page 33: Signal Description - Com Express Connector 2 (Cn1B)

    DP AUX+function if DDI[1:3]_DDC_AUX_SEL is no connect DDI[1:3]_CTRLCLK_AUX+ HDMI/DVI 12C CTRLCLK if DDI[1:3]_DDC_AUX_SEL is pulled high DP AUX-function if DDI[1:3]_DDC_AUX_SEL is no connect DDI[1:3]_CTRLDATA_AUX- HDMI/DVI 12C CTRLDATA if DDI[1:3]_DDC_AUX_SEL is pulled high DDI[1:3]_HPD Digital Display Interface Hot-Plug Detect ESM-KBLH User’s Manual 33...

  • Page 34: Bios Setup

    ESM-KBLH User’s Manual 3.BIOS Setup 34 ESM-KBLH User’s Manual...

  • Page 35: Introduction

    If the message disappears before you respond and you still wish to enter Setup, restart the system to try again by turning it OFF then ON or pressing the "RESET" button on the system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. ESM-KBLH User’s Manual 35...

  • Page 36: Using Setup

    Note: Some of the navigation keys differ from one screen to another.  To Display a Sub Menu Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “” pointer marks all sub menus. 36 ESM-KBLH User’s Manual...

  • Page 37: Getting Help

    Even a seemingly small change to the chipset setup has the potential for causing you to use the override. ESM-KBLH User’s Manual 37...

  • Page 38: Bios Setup

    <Enter> to accept and enter the sub-menu. 3.6.1 Main Menu This section allows you to record some basic hardware configurations in your computer and set the system clock. 38 ESM-KBLH User’s Manual...

  • Page 39: System Language

    Use the system time option to set the system time. Manually enter the hours, minutes and seconds. Note: The BIOS setup screens shown in this chapter are for reference purposes only, and may not exactly match what you see on your screen. ESM-KBLH User’s Manual 39...

  • Page 40: Advanced Menu

    This section allows you to configure your CPU and other system devices for basic operation through the following sub-menus. 3.6.2.1 CPU Configuration Use the CPU configuration menu to view detailed CPU specification and configure the CPU. 40 ESM-KBLH User’s Manual...

  • Page 41: Power & Performance

    Number of cores to enable in each processor Active Processor Cores package. Enabled for Windows XP and Linux (OS optimized Disabled, for Hyper- Threading Technology) and Disabled for Hyper-Threading Enabled[Default] other OS (OS not optimized for Hyper- Threading Technology). 3.6.2.2 Power & Performance ESM-KBLH User’s Manual 41...

  • Page 42: Cpu - Power Management Control

    EMTTM enabled too). AUTO means enabled, unless Disabled max turbo ratio is bigger than 16 – SKL a0 W/A. Enabled[Default], Enable/Disable CPU Power Management. Allows CPU C States Disabled to go to C states when it’s not 100291697032tilized. 42 ESM-KBLH User’s Manual...
  • Page 43 Power Limit 2. Power Limit 2 value in Milli Watts. BIOS will round to the nearest 1/8W when Power Limit 2 programming. If the value is 0, BIOS will program this value as 1.25*TDP. For ESM-KBLH User’s Manual 43...

  • Page 44: Gt - Power Management Control

    Feature. This feature will opportunistically lower the turbo frequency to increase Disabled, Energy Efficient Turbo efficiency. Recommended only to disable in Enabled[Default] overclocking situations where turbo frequency must remain constant. Otherwise, leave enabled. 3.6.2.2.2 GT – Power Management Control 44 ESM-KBLH User’s Manual...

  • Page 45: Pch-Fw Configuration

    AMT BIOS Features Enabled[Default] MEXb Setup. Note: This option does not disable Manageability Features in FW. Disabled, When Disabled ME will not be unconfigured on ME Unconfig on RTC Clear Enabled[Default] RTC Clear. ESM-KBLH User’s Manual 45...

  • Page 46: Amt Configuration

    ESM-KBLH User’s Manual 3.6.2.3.1 AMT Configuration Item Option Description Disabled, ASF support Enable/Disable Alert Standard Format support. Enabled[Default] Disabled[Default], USB Provisioning of AMT Enable/Disable of AMT USB Provisioning. Enabled 3.6.2.3.1.1 CIRA Configuration 46 ESM-KBLH User’s Manual...
  • Page 47 Trigger CIRA boot. Note: Network Access must be activated first Activate Remote Assistance Process from MEBx Setuup. 3.6.2.3.1.2 ASF Configuration Item Option Description Disabled, Enable/Disable PET Events Progress to receive PET Progress Enabled[Default] PET Events. Disabled[Default], WatchDog Enable/Disable WatchDog Timer. Enabled ESM-KBLH User’s Manual 47...
  • Page 48 Description Change Secure Erase module behavior: Simulated[Default] Secure Erase mode Simulated: Performs SE flow without erasing Real SSD Real: Erase SSD. Disabled[Default], Force Secure Erase Force Secure Erase on next boot. Enabled 3.6.2.3.1.4 OEM Flags Settings 48 ESM-KBLH User’s Manual...
  • Page 49 3.6.2.3.1.5 MEBx Resolution Settings Item Description Auto[Default], Non-UI Mode Resolution 80x25 Resolution for non-UI text mode. 100x31 Auto[Default], UI Mode Resolution 80x25 Resolution for UI text mode. 100x31 Auto[Default], Graphics Mode Resolution Resolution for graphics mode. 640x480 ESM-KBLH User’s Manual 49...

  • Page 50: Firmware Update Configuration

    ESM-KBLH User’s Manual 800x600 1024x768 3.6.2.3.2 Firmware Update Configuration Item Option Description Disabled [Default], ME FW Image Re-Flash Enable/Disable Me FW Image Re-Flash function. Enabled 50 ESM-KBLH User’s Manual...

  • Page 51: Ptt Configuration

    PTT in SkuMgr Warning! PTT/dTPM will be disabled and all data saved on it will be lost. PTP Aware[Default] Select whether or not the OS you will boot to will PTP aware OS Not PTP Aware be PTP aware. ESM-KBLH User’s Manual 51...

  • Page 52: Trusted Computing

    TCG_2[Default], new TCG2 protocol and event format for Win10 or later. Physical Presence Spec Select to Tell O.S. to support PPI Spec Version 1.2 or Version 1.3[Default], 1.3. Note some HCK tests might not support 1.3. 52 ESM-KBLH User’s Manual...

  • Page 53: Apci Settings

    Enable or Disable S3 Video Repost. Enabled Disabled[Default], ErP Function ErP Function (Deep S5). Enabled Off[Default] Select the power station after power Pwr-On After PWR-Fail failure. Last state Disabled[Default], Wake Up By Ring System wake up by ring (from S3~S5). Enabled ESM-KBLH User’s Manual 53...

  • Page 54: Nct6106D Super Io Configuration

    Please refer to 3.6.2.6.1~ 3.6.2.6.3 for more information. Item Description Serial Port 1 Configuration Set Parameters of Serial Port 1 (COMA). Serial Port 2 Configuration Set Parameters of Serial Port 2 (COMB). Parallel Port Configuration Set Parameters of Parallel Port (LPT/LPTE). 54 ESM-KBLH User’s Manual...

  • Page 55: Serial Port 1 Configuration

    ESM-KBLH User’s Manual 3.6.2.6.1 Serial Port 1 Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.6.2 Serial Port 2 Configuration ESM-KBLH User’s Manual 55...

  • Page 56: Parallel Port Configuration

    Enable or Disable Parallel Port Parallel Port Disabled (LPT/LPTE). STD Printer Mode[Default] EPP-1.9 and SPP Mode EPP-1.7 and SPP Mode Device Mode Change the Printer Port mode. ECP Mode ECP and EPP 1.9 Mode ECP and EPP 1.7 Mode 56 ESM-KBLH User’s Manual...

  • Page 57: Nct6106D Hw Monitor

    ESM-KBLH User’s Manual 3.6.2.7 NCT6106D HW Monitor 3.6.2.8 IT8528SEC Super IO Configuration You can use this item to set up or change the IT8528SEC Super IO configuration for serial ports. Please refer to 3.6.2.8.1~ 3.6.2.8.2 for more information. ESM-KBLH User’s Manual 57...

  • Page 58: Ser0_Tx/Ser0_Rx (Jcn3) Configuration

    ESM-KBLH User’s Manual 3.6.2.8.1 SER0_TX/SER0_RX (JCN3) Configuration Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.8.2 SER1_TX/SER1_RX (JCN3) Configuration 58 ESM-KBLH User’s Manual...

  • Page 59: H/W Monitor

    ESM-KBLH User’s Manual Item Option Description Enabled[Default], Serial Port Enable or Disable Serial Port (COM). Disabled 3.6.2.9 H/W Monitor Item Options Description Enabled, Smart Fan Function Enables or Disables Smart Fan. Disabled[Default] ESM-KBLH User’s Manual 59...

  • Page 60: Smart Fan Mode Configuration

    3.6.2.9.1 Smart Fan Mode Configuration Item Option Description Manual Mode[Default]/, Mode 01/02/03/04/05 CPU Smart Fan Mode Select (Manual, Mode CPU Smart Fan Mode /06/07/08/09/10 1~Mode 20). /11/12/13/14/15 /16/17/18/19/20 Fan PWM (0-255) 0-255[Default] Fan PWM duty (0-255). 60 ESM-KBLH User’s Manual...

  • Page 61: S5 Rtc Wake Settings

    Enable or disable System wake on alarm event. Select Disabled[Default], Fixed Time, system will wake on the hr::min::sec specified. Wake system from S5 Fixed Time Select Dynamic Time, System will wake on the current time Dynamic Time + Increase minute(s). ESM-KBLH User’s Manual 61...
  • Page 62 Select Fixed Time, system will wake on the Wake system from S5 Fixed Time hr::min::sec specified. Select Dynamic Time, System Dynamic Time[Default] will wake on the current time + Increase minute(s). Wake up minute increase 1-5. 62 ESM-KBLH User’s Manual...

  • Page 63: Serial Port Console Redirection

    ESM-KBLH User’s Manual 3.6.2.11 Serial Port Console Redirection Item Options Description Disabled[Default], Console Redirection Console Redirection Enable or Disable. Enabled 3.6.2.11.1 Smart Fan Mode Configuration ESM-KBLH User’s Manual 63...
  • Page 64 Enables or disables extended terminal resolution. Enabled Legacy OS Redirection 80x24[Default] On Legacy OS, the Number of Rows and Resolution 80x25 Columns supported redirection. VT100[Default] LINUX XTERMR6 Putty KeyPad Select FunctionKey and KeyPad on Putty. ESCN VT400 64 ESM-KBLH User’s Manual...

  • Page 65: Console Redirection Settings

    ‘stop’ signal can be sent to stop None[Default] Flow Control Hardware RTS/CTS the data flow. Once the buffers are empty, a ‘start’ signal can be sent to re-start the flow. Software Xon/Xoff Hardware flow control uses two wires to send start/stop signals. ESM-KBLH User’s Manual 65...

  • Page 66: Console Redirection Settings

    ESM-KBLH User’s Manual 3.6.2.11.3 Console Redirection Settings Item Option Description Select a COM port to display redirection of Legacy Serial Redirection Port COM0[Default] Legacy OS and Legacy OPROM Messages. 3.6.2.12 Intel TXT Configuration 66 ESM-KBLH User’s Manual...

  • Page 67: Network Stack Configuration

    Enable/Disable UEFI Network Stack. Disabled[Default] Item Options Description Enabled[Default] Network Stack Enable/Disable UEFI Network Stack. Disabled Enable Ipv4 PXE Boot Support. If disabled Enabled Ipv4 PXE Support Disabled[Default] IPV4 PXE boot option will not be created. ESM-KBLH User’s Manual 67...

  • Page 68: Csm Configuration

    Wait time to press ESC key to abort the PXE PXE boot wait time boot. Number of times presence of media will be Media detect count checked. 3.6.2.14 CSM Configuration Item Options Description Enabled CSM Support Enable/Disable CSM Support. Disabled[Default] 68 ESM-KBLH User’s Manual...
  • Page 69 Legacy[Default] Do not launch Controls the execution of UEFI and Legacy Video UEFI Video OpROM. Legacy[Default] Do not launch Determines OpROM execution policy for Other PCI devices UEFI devices other than Network, Storage, or Legacy[Default] Vide. ESM-KBLH User’s Manual 69...

  • Page 70: Nvme Configuration

    ESM-KBLH User’s Manual 3.6.2.15 NVMe Configuration 3.6.2.16 USB Configuration The USB Configuration menu helps read USB information and configures USB settings. 70 ESM-KBLH User’s Manual...
  • Page 71 Mass storage device emulation type. ‘AUTO’ Auto[Default] Floppy enumerates devices according to their media Mass Storage Devices Forced FDD format. Optical drives are emulated as ‘CDROM’, drives with no media will be Hard Disk CD-ROM emulated according to a drive type. ESM-KBLH User’s Manual 71...

  • Page 72: Chipset

    ESM-KBLH User’s Manual 3.6.3 Chipset 3.6.3.1 System Agent (SA) Configuration Item Option Description Enabled[Default] VT-d VT-d capability. Disabled 72 ESM-KBLH User’s Manual...

  • Page 73: Graphics Configuration

    Select DVMT 5.0 Pre-Allocated (Fixed) Graphics DVMT Pre-Allocated Memory size used by the Internal Graphics Device. 32M/F7[Default] 256M[Default] Select DVMT 5.0 Total Graphics Memory size DVMT Total Gfx Mem 128M used by the Internal Graphics Device. ESM-KBLH User’s Manual 73...
  • Page 74 Port-A. eDP Port-D:LFP Driven by Int-DisplayPort encoder from Port-D(through PCH). 1024x768 18/1[Default] 1366x768 18/1 1024x600 18/1 Port1-EDP to LVDS (Chrotel 7511) Panel CH7511 EDID Panel Option 1280x800 18/1 EDID Option. 1920x1200 24/2 640x480 18/1 74 ESM-KBLH User’s Manual...
  • Page 75 Select LVDS back light PWM Frequency. Frequency 2kHz 3kHz 5kHz 10kHz 20kHz Item Option Description VBIOS Default[Default], Select the Video Device which will be Primary IGFX Boot Display activated during POST. This has no effect if external graphics present. Secondary boot ESM-KBLH User’s Manual 75...

  • Page 76: Peg Port Configuration

    Integrated encoder. SDVO LVDS:VBIOS No eDP[Default], Active LFP enables LVDS driver by SDVO encoder. eDP Port-A eDP Port-A:LFP Driven by Int-DisplayPort encoder from Port-A. eDP Port-D:LFP Driven by Int-DisplayPort encoder from Port-D(through PCH). 3.6.3.1.2 PEG Port Configuration 76 ESM-KBLH User’s Manual...
  • Page 77 Port. The number has to be globally unique 1[Default] within the chassis. Values 0-8191. PEG 0:1:1 Item Option Description Disabled Enable Root Port Enabled Enable or Disable the Root Port. Auto[Default] Auto[Default] Max Link Speed Gen1 Configure PEG 0:1:1 Max Speed. Gen2 ESM-KBLH User’s Manual 77...
  • Page 78 Values 0-8191. Enabled: PCIe ASPM will be programmed Program PCIe ASPM after Disabled[Default] after OpROM. Disabled: PCIe ASPM will be OpROM Enabled programmed before OpROM. Disabled Program Static Phase1 Eq Program Phase1 Presets/CTLEp. Enabled[Default] 78 ESM-KBLH User’s Manual...
  • Page 79 ESM-KBLH User’s Manual 3.6.3.1.3.1 PEG Port Feature Configuration Item Option Description Disabled[Default], Detect Non-Compliance PCI Express Detect Non-Compliance Device Enabled Device in PEG. 3.6.3.1.3.2 Gen3 Root Port Preset value for each Lane ESM-KBLH User’s Manual 79...
  • Page 80 ESM-KBLH User’s Manual Item Option Description Lane0/1/2/3/4/5/6/7 Value of Lane 0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15. /8/9/10/11/12/13/14/15 3.6.3.1.3.3 Gen3 Endpoint Preset value for each Lane Item Option Description Lane0/1/2/3/4/5/6/7 Value of Lane 0/1/2/3/4/5/6/7/8/9/10/11/12/13/14/15. /8/9/10/11/12/13/14/15 3.6.3.1.3.4 Gen3 Endpoint Hint value for each Lane 80 ESM-KBLH User’s Manual...
  • Page 81 Bundle5 Gen3 RxCTLE setting for Bundle5 (Lane10, Lane11). Bundle6 Gen3 RxCTLE setting for Bundle6 (Lane12, Lane13). Bundle7 Gen3 RxCTLE setting for Bundle7 (Lane14, Lane15). Disabled[Default], When Enabled, it overrides PEG’s RxCTLE adaptive RxCTLE Override Enabled behaviour. ESM-KBLH User’s Manual 81...

  • Page 82: Pch-Io Configuration

    Enable or disable integrated LAN to wake Wake on LAN Enable Enabled[Default] the system. Quiet Serial IRQ Mode Configure Serial IRQ Mode. Continuous[Default] LPC Bus[Default] Port 80h Redirection Control where the Port 80h cycles are sent. PCIE Bus 82 ESM-KBLH User’s Manual...

  • Page 83: Pci Express Configuration

    Option Description Enabled[Default], PCI Express Root Port 1 Control the PCI Express Root Port. Disabled Unknown Identify the SATA Topology if it is Default or Topology x4[Default] ISATA or Flex or DirectConnect or M2. Sata Express ESM-KBLH User’s Manual 83...
  • Page 84 Identify the SATA Topology if it is Default or Topology ISATA or Flex or DirectConnect or M2. Sata Express Set the ASPM Level: Force L0s – Force all Auto, ASPM links to L0s State AUTO – BIOS auto L0sL1 84 ESM-KBLH User’s Manual...
  • Page 85 Topology ISATA or Flex or DirectConnect or M2. Sata Express Auto, Set the ASPM Level: Force L0s – Force all L0sL1 links to L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. Disabled[Default] ESM-KBLH User’s Manual 85...
  • Page 86 Topology ISATA or Flex or DirectConnect or M2. Sata Express Auto, Set the ASPM Level: Force L0s – Force all L0sL1 links to L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. Disabled[Default] 86 ESM-KBLH User’s Manual...
  • Page 87 Sata Express Auto, Set the ASPM Level: Force L0s – Force all L0sL1 links to L0s State AUTO – BIOS auto ASPM configure DISABLE – Disables ASPM. Disabled[Default] Disabled[Default], L1 Substates PCI Express L1 Substates settings. L1.1 ESM-KBLH User’s Manual 87...

  • Page 88: Sata And Rst Configuration

    Gen3 Enabled[Default] Port 0/1/2/3 Enable or Disable SATA Port. Disabled Hard Disk Drive[Default] Identify the SATA port is connected to Solid SATA Device Type Solid State Drive State Drive or Hard Disk Drive. 88 ESM-KBLH User’s Manual...

  • Page 89: Usb Configuration

    ISATA or Flex or DirectConnect or M2. Flex 3.6.3.2.3 USB Configuration Item Option Description Option to disable Compliance Mode. Default FALSE[Default], XHCI Disable Compliance Mode is FALSE to not disable Compliance Mode. TRUE Set TRUE to disable Compliance Mode. ESM-KBLH User’s Manual 89...

  • Page 90: Hd Audio Configuration

    Description Control Detection of the HD-Audio device. Disable = HDA Disabled will be unconditionally disabled Enabled = HDA will be HD Audio Enabled unconditionally enabled Auto = HDA will be enabled if Auto[Default], present, disabled otherwise. 90 ESM-KBLH User’s Manual...

  • Page 91: Security

    ESM-KBLH User’s Manual 3.6.4 Security  Administrator Password Set setup Administrator Password  User Password Set User Password ESM-KBLH User’s Manual 91...

  • Page 92: Secure Boot

    Disabled[Default] Attempt Secure Boot User mode with enrolled Platform Key(PK) 2.CSM Enabled function is disabled. Secure Boot mode selector: Standard/Custom. In Standard Secure Boot Mode Custom mode Secure Boot Variables can be Custom[Default] configured without authentication. 92 ESM-KBLH User’s Manual...

  • Page 93: Key Management

    ESM-KBLH User’s Manual 3.6.4.1.1 Key Management Item Option Description Disabled[Default] Allow to provision factory default Secure Provision Factory Defaults Enabled Boot keys when System is in Setup Mode. 3.6.5 Boot ESM-KBLH User’s Manual 93...

  • Page 94: Save And Exit

    Reset the system after saving the changes. 3.6.6.2 Discard Changes and Reset Any changes made to BIOS settings during this session of the BIOS setup program are discarded. The setup program then exits and reboots the controller. 94 ESM-KBLH User’s Manual...

  • Page 95: Restore Defaults

    This option restores all BIOS settings to the factory default. This option is useful if the controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS setting. 3.6.6.4 Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. ESM-KBLH User’s Manual 95...

  • Page 96: Drivers Installation

    ESM-KBLH User’s Manual 4. Drivers Installation Note: Installation procedures and screen shots in this section are for your reference and may not be exactly the same as shown on your screen. 96 ESM-KBLH User’s Manual...

  • Page 97: Install Chipset Driver

    Windows 10 operation system. If the warning message Step 3. Click Install. appears while the installation process, click Continue to go on. Step1. Click Next. Step 4. Complete setup. Step 2. Click Accept. ESM-KBLH User’s Manual 97...

  • Page 98: Install Display Driver

    Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Yes to accept license Step 5. Click Finish to complete setup. agreement. 98 ESM-KBLH User’s Manual...

  • Page 99: Install Lan Driver (For Intel I219Lm)

    Note: The installation procedures and screen shots in this section are based on Windows 10 operation system. Step 3. Click Next. Step 1. Click Install Drivers and Software. Step 4. Click Next. Step 5. Click Install. Step 2. Click Next to complete setup. ESM-KBLH User’s Manual 99...
  • Page 100 ESM-KBLH User’s Manual Step 6. Click Finish to complete setup. 100 ESM-KBLH User’s Manual...

  • Page 101: Install Me Driver

    If the warning message Step 3. Click Next. appears while the installation process, click Continue to go on. Step1. Click Next to start installation. Step 4. Click Finish to complete setup. Step 2. Click Next. ESM-KBLH User’s Manual 101...

  • Page 102: Install Serial Io Driver

    Windows 10 operation system. Step 3. Click Next. Step 1. Click Next to continue installation. Step 4. Click Next. Step 2. Click Next. Step 5. Click Finish to complete setup. 102 ESM-KBLH User’s Manual...

  • Page 103: Mechanical Drawing

    ESM-KBLH User’s Manual 5. Mechanical Drawing ESM-KBLH User’s Manual 103...
  • Page 104 ESM-KBLH User’s Manual Unit: mm 104 ESM-KBLH User’s Manual...
  • Page 105 ESM-KBLH User’s Manual Unit: mm ESM-KBLH User’s Manual 105...

Table of Contents