KEYA TRONIC PRO Manual

KEYA TRONIC PRO Manual

Electronic lock
Hide thumbs Also See for TRONIC PRO:

Advertisement

TRONIC PRO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRONIC PRO and is the answer not in the manual?

Questions and answers

Summary of Contents for KEYA TRONIC PRO

  • Page 1 TRONIC PRO...
  • Page 2 TRONIC PRO www.keya.cat...
  • Page 3 TRONIC PRO Multiuser mode To close: To open: Open and close by 4-digit code. The code is erased every time the lock is opened, being available for a new use. Single User mode To open: To close: The latch closes automatically after 2 seconds.
  • Page 4 TRONIC PRO Change the User code press during 3 seconds CURRENT code NEW code Press Enter during 3 seconds. Introduce Current code and press Enter. Introduce New code and press Enter. Open using Master code: Inspection mode / Delete User code...
  • Page 5 TRONIC PRO Change the Master code press during 3 seconds CURRENT master code NEW master code Press Enter during 3 seconds. Introduce Current master code and press Enter. Introduce New master code and press Enter. Open using electronic Master key: Inspection mode/ Delete User code...
  • Page 6 TRONIC PRO Programmable settings ( management software and cable required ) AUTOMATIC OPENING TIME: The lock will open automatically at the programmed time: - hh : mm - Mon, Tue, Wed, Thu, Fri, Sat, Sun - Working days - Two options: Leave door open...
  • Page 7 TRONIC PRO Batteries replacement Torx T20 IMPORTANT: The batteries replacement must be done in less than 5 minutes. The BATPACK must remain connected during the release of the 4 x AA(LR6) batteries (otherwise the clock will loose the programmed time).
  • Page 8 775006 ENG - Rev1...

Table of Contents

Save PDF