1. Manuals
  2. Brands
  3. Archtek Manuals
  4. Modem
  5. 5634PCV
  6. User manual

Archtek 5634PCV User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
5634 PCV
User's Manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5634PCV and is the answer not in the manual?

Questions and answers

Related Manuals for Archtek 5634PCV

Summary of Contents for Archtek 5634PCV

  • Page 1 5634 PCV User’s Manual...

  • Page 2: Table Of Contents

    Table Contents Table Contents ..................2 Chapter 1 Installation................3 1. 1 Checking your components ............3 1. 2 What else you need..............3 1. 3 Removing the computer cover..........3 1. 4 Inserting the modem..............4 1. 5 Connecting to the telephone line ..........5 1. 6 Connecting to your telephone...........5 1.

  • Page 3: Chapter 1 Installation

    Chapter 1 Installation Chapter 1 provides detailed instructions for installing your modem. 1.1 Checking your components Unpack your components and make sure you have the following items: l The modem. l A modular telephone cable to connect your modem to the telephone line. l This user's manual.

  • Page 4: Inserting The Modem

    screws in a safe place and remove the computer cover. 1.4 Inserting the modem The internal modem can fit into any available PCI slot in your personal computer. To insert the internal modem in your personal computer: 1. Position yourself so that you can easily access the computer's expansion slots.

  • Page 5: Connecting To The Telephone Line

    1.5 Connecting to the telephone line Use the following procedure to connect your modem to the telephone line: 1. Make sure you have an RJ-11 telephone jack. If you need a modular jack, either obtain a telephone adapter from a telephone or electronics store and follow the installation instructions provided with the adapter, or have your local telephone company replace your existing telephone jack with a modular-type jack and your existing telephone cord with a modular cord.

  • Page 6: Verifying Your Connection

    LINE PHONE 5634PCV Figure 1-2. Back of the modem 1.7 Verifying your connection Before you proceed to next step, make sure your connection matches the one shown in Figure 1-3. MODEM CARD LINE JACK PHONE JACK 5634PCV Figure 1-3. Completed modem installation If you connected the modem to a computer, place the computer into terminal mode and complete the configuration information required by the software.

  • Page 7: Windows 95/98 Modem Driver Installation ( Pnp)

    1. Install the PnP modem into an available slot. 2. Turn On your computer. 3. As you enter Windows you should receive a message saying “PCI communication Device”, than “5634PCV V90 modem”. 4. Windows will identify the modem and then present you with three choices.

  • Page 8: Windows Nt4.0 Modem Driver Installation

    file then hit OK. You will be presented with a listing of Topic modems. Select the model number of your modem and then hit OK. 5. Click Finish and Windows will install the driver, and then finish booting. To check the modem installation open Control Panel and then Modems.

  • Page 9: Ms-Dos Modem Driver Installation

    PC in advance. Besides, it can be used to configure the multiple PCI cards. Configuration When the program is launched, it will search the 5634PCV PCI card first. If no card is found, an error message will be shown and the program will be terminated.
  • Page 10 ‘ OK’ button to set the desired setting to PCI card and exit the program. If user selects ‘ Cancel’ button, the changed setting will not be effective. Please note the changed setting will not be stored and saved in PC BIOS or PCI card after PC is rebooted.

  • Page 11: Chapter 2 At Commands Set

    Chaper 2 AT Commands Set AT commands are issued to DTE to control the modem's operation. AT commands can only be entered while the modem is in command mode. Except for the A/ command and the +++ escape command, all commands must be prefixed with the attention code AT.
  • Page 12 Bn Communication Standard Setting This command determines ITU-T vs. Bell standard. B0 Selects ITU-T V.22 mode when the modem is at 1200 bits/s. B1 Selects Bell 212A when the modem is at 1200 bits/s (default). Result Codes: OK : n = 0, 1, 15, 16 ERROR : Otherwise Dn Dial This command instructs the modem to begin the dialing sequence.
  • Page 13 hook to make the phone line busy. H0 Modem goes on-hook (default). H1 Modem goes off-hook. Result Codes: OK: n = 0, 1 ERROR: Otherwise In Request Identification Information This command displays specific product information about the modem. I0 Returns product ID code. I1 Display Firmware version and checksum on the DTE.
  • Page 14 M1* The speaker is on until the modem detects the carrier signal. M2 The speaker is always on when modem is off-hook. M3 The speaker is on until the carrier is detected, except while dialing. Result Codes: OK n = 0, 1, 2, 3 ERROR Otherwise Nn Modulation Selection This command controls whether or not the local modem performs a negotiated...
  • Page 15 Qn Result Code Control Result codes are informational messages sent from the modem and displayed on your monitor. Q0* Enables modem to send result codes to the DTE. Q1 Disables modem from sending result codes. Result Codes: OK n = 0, 1 ERROR Otherwise T Select Tone Dialing This command instructs the modem to send DTMF tones while dialing.
  • Page 16 Result Codes: OK n = 0, 1, 2, 3, 4, 5, 6, 7 ERROR Otherwise Zn Recall Stored Profile This command instructs the modem chip set to go on-hook and restore the profile saved by the last &W command. Z0 Reset modem and retrieve active configuration profit from stored profit 0. Z1 Reset modem and retrieve active configuration profit from stored profit 1.
  • Page 17 &Fn Load Factory Settings This command loads the configuration stored and programmed at the factory. This operation replaces all of the command options and the S-register settings in the active configuration with factory values. &Gn V.22bis Guard Tone Control This command determines guard tone frequency and is only used in V.22 and V.22bis mode.
  • Page 18 &Rn Clear To Send Signal Select &R0 Modem turns on the Clear To Send signal when it detects the Request To Send (RTS) signal. &R1* Modem turns on Clear To Send signal. Result Codes: OK n = 0, 1 ERROR Otherwise &Sn Data Set Ready (DSR) Option This command selects DSR action.
  • Page 19 &Yn Select Stored Profile for Power On or Reset This command does not change the behavior of the modem but is included for compatibility with applications that issue the &Y0 command &Y0 Select stored profile 0. &Y1 Select stored profile 1. Result Codes: OK n = 0 ERROR Otherwise...
  • Page 20 *I3 Selects connect speed 30666bps *I4 Selects connect speed 32000bps *I5 Selects connect speed 33333bps *I6 Selects connect speed 34666bps *I7 Selects connect speed 36000bps *I8 Selects connect speed 37333bps *I9 Selects connect speed 38666bps *I10 Selects connect speed 40000bps *I11 Selects connect speed 41333bps *I12 Selects connect speed 42666bps *I13 Selects connect speed 44000bps...
  • Page 21 *NC17 Greece *NC10 Netherlands *NC7 Ireland *NC8 Italy *NC43 Japan *NC26 Namibia *NC11 Norway *NC12 Portugal *NC27 South Africa *NC13 Spain *NC14 Sweden *NC15 Switzerland *NC16 UK *NC19 Czech Republic *NC24 Poland *NC25 Russia *NC22 United States *Tn Trellis Coding Selection *T0 Disables Trellis coding *T1* Enables Trellis coding *On Transmission Level Selection...
  • Page 22 \ Nn Error Control Mode Selection This command determines the type of error control used by the modem when sending or receiving data. \ N0 Normal mode. \ N1 Direct mode. \ N2 MNP or disconnect mode. The modem attempts to connect using MN 2-4 error control procedures.

  • Page 23: Result Code

    2. 2 Result Code Long Form Short Form n value in ATXn 0 1 2 3 4 x x x x x CONNECT x x x x x RING x x x x x NO CARRIER x x x x x ERROR x x x x x CONNECT 1200...
  • Page 24 CONNECT 28800 x x x x CONNECT 31200 x x x x CONNECT 33600 x x x x (V.90 mode) CONNECT 28000 x x x x CONNECT 29333 x x x x CONNECT 30666 x x x x CONNECT 32000 x x x x CONNECT 33333 x x x x...

  • Page 25: S Registers Definitions

    S Registers Definitions S registers generally affect how the AT commands perform. Contents of the registers can be displayed or modified when the modem is in command mode. To display the value of an S register: TYPE: ATSn?, where n is the register number.
  • Page 26 This register determines the ASCII values as the carriage return character. This character is used to end command lines and result codes. Range: 0-127, ASCII decimal Default: 13 (carriage return) Units: ASCII S4 Response Formatting Character (User Defined) This register determines the ASCII value used as the line feed character. The modem uses a line feed character in command mode when it responds to the computer.
  • Page 27 modifier in seconds. S7 is not associated with the W dial modifier. Range: 1-255 Default: 45 Units: seconds S8 Comma Dial Modifier Time This register sets the time, in seconds, that the modem must pause when it encounters a comma (,) in the dial command string. Range: 1-255 Default: 2 Units: seconds...
  • Page 28 S12 Escape Guard Time This register sets the value (in 20 ms increments) for the required pause after the escape sequence (default 1 s). Range: 0-255 Default: 50 Units: 0.02 seconds S14 Bit-mapped Register Bit-mapped register S14 lets you control modem echo, responses, dialing method, and the original or answer mode.
  • Page 29 S22 Bit mapped Register Bit-mapped register S22 lets you control internal speaker and the modem responses. Function 0,1= 0 Speaker volume off (L0) 1 Low speaker volume (L1) 2 Medium speaker volume (L2) – default 3 Loud speaker volume (L3) 2,3= 0 Speaker off (M0) 1 Speaker on until carrier detected (M1) –...
  • Page 30 S25 Data Terminal Ready Delay When Modem is on-line, it will ignore a Data Terminal Ready signal lasting less than the value of this register. In this mode, the values for this register are 0 to 255 in hundredths of a second, and the default value is 0.05 seconds. If you will be entering synchronous mode after dialing asynchronously, this register determines how long the modem waits before looking for the Data Terminal Ready signal.
  • Page 31 value to 5, and the inactivity before standby will be 5 s. This is done for compatibility with previous products which allowed time-outs down to 1 s. Range: 0, 5-255 Default: 10 Bit Value Function 0,1 Mapping to ATWn 2 Mapping to AT\V 3 Mapping to ATN 4 Mapping to AT*O S96 Local Phone Status...

  • Page 32: Class 1 Fax Commands

    Class 1 FAX Commands The modem chip set supports FAX commands conforming to EIA standard 578. These commands are given here with short descriptions; complete explanations are given in the standard, available from the Electronic Industry Association. FAX Command Set Summary +FCLASS? Service class indication +FCLASS = ?
  • Page 33 Parameters: 0, 1, 8 Default: 0 Command options: +FCLASS = 0 Select data mode. +FCLASS = 1 Select facsimile class 1. +FCLASS = 8 Select voice mode. +FTS = <n> Stop transmission and pause +FTM = <m> Transmit FAX Data This command causes the modem to transmit data at the modulation specified by <m>.
  • Page 34 +FRM = 121 V.17 12000 +FRM = 122 V.17 (short train) 12000 +FRM = 145 V.17 14400 +FRM = 146 V.17 (short train) 14400 +FTH = <m> Transmit HDLC Data This command causes the modem to transmit data framed in the HDLC protocol at the modulation specified by <m>.

  • Page 35: Voice Commands

    +FLO = <V> Flow Control Select +FLO=0 Xon/Xoff and RTS/CTS flow control Turned off +FLO=1 Xon/Xoff flow control +FLO=2 RTS/CTS flow control +FPR = <V> Serial Port Rate Voice Commands +VIP Initial voice parameter +VCID=<pmode> Caller ID pmode=0:Disable Caller ID pmode=1: Enable ,formatted caller report pmode=2:Enable ,unformatted caller report +VCID?
  • Page 36 sds>= 128 More aggressive ;ex. sds=129 is –39dbm sds<= 128 Less aggressive :ex sds=127 is –40dbm sdi :Specify the amount of time the modem will report silence to DTE +VSD? Report current parameter +VSD=? Queries the range that DCE support +VTS DTMF and tone generation +VTS=?

  • Page 37: At% Ttn Commands

    AT% TTn Commands %tt0=0 erase %TT command %tt1=n Tx v90 signal %tt2=A,B,C,D Tx v34 signal parameter A: Baud Rate B: Data Rate C: Min/Exp D: Pre-emphasis %tt3=0 : DTMF '0' %tt3=1 : DTMF '1' %tt3=2 : DTMF '2' %tt3=3 : DTMF '3' %tt3=4 : DTMF '4' %tt3=5 : DTMF '5' %tt3=6 : DTMF '6'...
  • Page 38 %tt4=3 : V21 Ans tx space %tt4=4 : V23 Org tx mark %tt4=5 : V23 Org tx space %tt4=6 : V23 Ans tx mark %tt4=7 : V23 Ans tx space %tt4=8 : V22 org %tt4=9 : V22bis org %tt4=10 : V22 ans (tx guard tone if &g1 or &g2) %tt4=11 : V22bis ans (tx guard tone if &g1 or &g2) %tt5= 0 : V27ter 2400 %tt5= 1 : V27ter 4800...

Table of Contents