Power On/Off; Bluetooth Mode - borne BTSPK48 User Manual

Portable bluetooth speaker system
Table of Contents

Advertisement

To turn on and off the speaker, move the ON/OFF Switch to the desired position.
Note:
To turn off the front LED lights, press and hold the REP button until the LED lights go out. To turn on
the front LED lights, press and hold the REP button until the lights turn on.
Pairing a Bluetooth Enabled Device for the First Time
NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and
connecting Bluetooth devices.
1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing
process.
2. Move the ON/OFF Switch to the ON position and you will hear "Bluetooth Mode". You will
see "bLue" on the LED Display Screen and the colored LED lights will randomly flash from
the center and move outward. You are now in the Bluetooth pairing mode.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth
devices. When the search is complete, select "BTSPK48" from the Bluetooth device list.
4. When the Bluetooth connection is successful, a voice prompt "You Are Now Connected"
will indicate that you are connected and the colored LED lights will randomly flash and move
around
NOTE:
If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair
again.
After successful pairing, paired devices will remember each other. Unless pairing information
is deleted, re-pairing is not required after the first time.
If you want to pair the unit with other Bluetooth enabled devices, please disconnect the
existing device and pair with the new device according to the steps above.
5. Once you are successfully connected, you can use the controls on the speaker and the
controls on your Bluetooth device.
6. To increase or decrease the volume on the speaker, adjust the Master Volume Control on
the back of the unit to your desired level.
7. To skip songs forward or backward, press the Skip Backward or Skip Forward Buttons.
8. To pause and resume playback, press the Play/Pause Button anytime during playback.
If you disconnect the Bluetooth mode from your device you will hear "Bluetooth
9.
Disconnected" from the speaker.

POWER ON/OFF

BLUETOOTH MODE

E-4

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for borne BTSPK48

Table of Contents