Related Manuals for Third Reality RealitySwitch Plus
Summary of Contents for Third Reality RealitySwitch Plus
- Page 1 RealitySwitch Plus Life can be smarter than you think! ©2018 Third Reality Inc. All rights reserved.
- Page 2 Switch body Rocker backplane Toggle backplane Accessories Spacer *2 Screw *2 Battery *2 User Manual *1 Gasket *4 Features 1. Voice control via Amazon Echo series 2. Direct connectivity with Echo Plus 3. Compatibility with toggle and rocker panels 4. Compatibility with multiple devices on a single panel 5.
- Page 3 Instructions Welcome to your ThirdReality smart home! RealitySwitch Plus can be used with one of the following configurations: A. A RealityAdapter. B. An Amazon Echo Plus. C. An Amazon Echo series Google Home with a 3 compatible Wi-Fi to ZigBee Hub.
- Page 4 2) Place batteries inside your RealitySwitch Plus. You will see a fast blinking blue LED, indicating that your switch is in pairing mode. 3) To add your device (RealitySwitch Plus), please tap “+ New device” and follow the instructions in the app. You will need to have a RealityAdapter pairs with App before this step.
- Page 5 B. If you have the Echo Plus, you can connect it directly with the RealitySwitch using the steps below. Install the Amazon Alexa app on your smart phone or tablet. Register and log in to the app, and follow the tips shown to set up your Echo Plus.
- Page 6 2. Installation Two optional backplanes are provided in the product package. Choose one based on your existing toggle or rocker panels. 1) Tighten the backplane with the screws included in the package, paying attention to “up” direction. 2) Check and adjust the switch status with your switch panel to avoid part overlaps.
- Page 7 Please remove the protection films on the surface of the switch body. 3) Place the switch body onto your backplane, making sure to match the “up” direction (you can remove it first from the down direction). Install Toggle Take off Install Rocker Take off...
-
Page 8: Status Indication
If you find that your on/off status is inverted, press the RealitySwitch Plus button more than 10 seconds until the blue LED lights up. 2. Factory reset If you want to factory reset RealitySwitch Plus, long press the button more than 30 seconds until... - Page 9 the blue LED changes from on to fast blinking. (Attention: please make sure you press the button longer enough till the blue LED status keeps fast blinking.) 3. Missing wireless connection Generally it will be automatically reconnected when putting the device close to the Echo Plus or Hub.
-
Page 10: Limited Warranty
In some special cases, you may need to add spacers and/or gaskets to increase the distance between the RealitySwitch Plus body and the underlying switch. Warning There are two AA batteries in our product, please pay attention to safety and discard the used batteries in the recyclable trash can. - Page 11 FCC Statement: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any...
Need help?
Do you have a question about the RealitySwitch Plus and is the answer not in the manual?
Questions and answers