Kaval BDA-1000 User Manual page 11

Fault Displays include ;
Up Boost Overcurrent
Dn Boost Overcurrent
Up Boost Undercurr.
Dn Boost Undercurr.
Fan A Fail
Battery Low
Primary Power Fail
Up Boost Internal
Dn Boost Internal
External Fault
Calibration Fail
Dn Boost EEPROM
Downlink Overdrive
• Menus
•
Main Menu
The Main Menu is entered by pressing the Select Button from any Status Display. If the Password is set to anything
but 000 (default), then a Password Entry Screen appears. The user uses the Adjust Buttons to select a digit, and
presses the Select Button to enter that digit. The cursor moves to the next digit and enters it. When the third digit is
entered, and the Password is correct, the Main Menu becomes available. If an incorrect Password is entered, then the
message "Wrong Password" appears for a few seconds and the user must start again. If the Password is set to 000
(disabled) the Main Menu is available immediately.
Enter Password
4**
Main Menu entries are used to group Functions by category. The User selects the Category and a Sub-Menu appears
listing available Functions. While in the Main Menu, the top row of the display shows "Main Menu", and the bottom row
shows the Sub-Menu headings as one scrolls through them. When a Sub-Menu is selected, the Sub-Menu heading
replaces the Main Menu heading in the top row, and the bottom row then shows the Sub-Menu entries. If no Buttons
are pressed for 5 minutes while in any Menu the Display reverts to the last Status Display.
Available main Menu entries are:
Gain
Uplink PA
Downlink PA
Fans
Controller
l Page 11
Up PA Overcurrent
Dn PA Overcurrent
Up PA Undercurrent
Dn PA Undercurr
Fan B Fail
Imminent Shutdown
Overtemperature
Up PA Internal
Dn PA Internal
Controller Fault
Up Boost EEPROM
Uplink Overdrive
RS-232 Active
Uplink Booster
Downlink Booster
Temperature
Battery
Calibration
Kaval Telecom Inc. DCM000000001