Advertisement
Connecting the Transmitter
How To Transmit Audio/Video from Your VCR
1
Make sure the Backgrounds Unlimited TXBD12A Transmitter ON/OFF switch is
in the OFF position. Connect one set of audio/video (A/V) cables to the A/V jacks
of the transmitter and to the A/V jacks on the back of your VCR labeled LINE
OUT. Be sure the yellow, red and white plugs match the yellow, red and white
jacks on both the VCR and the transmitter. If the VCR has only one output for
audio (mono sound only), connect the white plug to that single audio output and to
transmitter's AUDIO LEFT jack.
2 Plug one end of the provided power adapter into the back of the Backgrounds
Unlimited TXBD12A transmitter and the other end into any 120-volt wall outlet. Turn
the ON/OFF switch to ON position and channel 1 indicator light should be lit.
3
If your VCR has only one set of A/V output jacks and you want to use it with a
nearby TV, connect coaxial cable from the single OUT port on your VCR to the
VHF/UHF IN port on your TV. (Note: In order to also view cable transmission on
that TV, connect your incoming cable TV source to the single IN port of the VCR.)
4
Locate and orient the transmitter according to the section of this manual titled
"Orienting Units for Optimal Performance.'
BACKGROUNDS UNLIMITED, TXBD12A TRANSMITTER
Advertisement
