eGeeTouch GT2100 Quick Start Manual

A COMPLETE GUIDE and VIDEO TUTORIALS are available online at www.egeetouch.com/-
Set Up & Get Started
1
Charging
Use any standard external USB
power source (e.g. Portable USB
power bank) to charge/power up
your smart lock.
The LED indicator on your smart
lock flashes in RED when charging.
2 ways to unlock:
A. Unlock with Smartphone
Note: You will need to download and finish the "Set Up & Get Started" step, before using the "eGeeTouch Manager"
App on your smartphone to unlock.
Select your smart lock in your eGeetouch
Manager App & press the shackle firmly
against the base and release to power on
lock & pair.
B. Unlock with NFC smart fob
Note: You may also use the smart lock without using the "eGeeTouch Manager" App or your smartphone. Follow
the steps below.
Press & hold for ~5 sec until the LED
light flashes in green.
SMART PADLOCK
Model GT2100
QUICK START GUIDE*
*This Quick Start Guide covers the above model.
2
Download & Install App
eGeeTouch
Manager
Launch the App Store on your smartphone
Search for "eGeeTouch Manager" App & Install
Tap the lock icon in your mobile app to
unlock your Smart Padlock. The lock icon in
your app turns green indicating succesful
unlocking
Tap a paired-NFC smart FOB.
Note: Fobs out-of-the-box are already
pre-paired with lock
support/video
3
Pairing
On your smartphone, launch the
"eGeeTouch Manager" app
Follow In-App Instructions displayed
on your smartphone
Press the shackle firmly against the
base and release to power on lock & pair.
Pull off the shackle
Pull off the shackle