Table of Contents
Advertisement
Quick Links
SLZ08 Product Operation Manual
Manufacture: WUHAN SUNON ELECTRONIC CO.,LTD.
Product Schematic ..................................... .....................
Bluetooth connection for mobile phones and watches ............... part 2
Mobile phone APP settings ................................................ part 3
Analog watch core timing function ....................................... part 4
Step function .................................................................. part 5
Mobile APP (WeChat, etc.) message alert function ..................... part 8
Anti-lost alarm function ...................................................... part 9
Watch charging ...............................................................
① ................ Stem
② ................ switch
③ ................ Message signal light
④ ................ Charging signal indicator light \ low battery indicator light
⑤ ................ Call signal display light
Watch movement
SUNON
：
part 1
Product Schematic
part 1
part 10
⑥................ Charging socket
⑦................ Hour hand
⑧................ Second hand
⑨................ Minute hand
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for SUNON SLZ08
- Page 1 SLZ08 Product Operation Manual Watch movement SUNON Manufacture: WUHAN SUNON ELECTRONIC CO.,LTD. Product Schematic ………………………………. ………………… part 1 Bluetooth connection for mobile phones and watches …………… part 2 Mobile phone APP settings ………………………………………… part 3 Analog watch core timing function ………………………………… part 4 Step function …………………………………………………………...
-
Page 2: Bluetooth Connection For Mobile Phones And Watches
： part 2 Bluetooth connection for mobile phones and watches Ⅰ、 mobile phone APP installation 1.1: Download through the store 1.2：installation 1.3：The installation is complete or download it from the official website Ⅱ、Connect your phone to Bluetooth 1、The first step is to determine whether the movement is in running time. If not running Please check if the shaft is pushed If the watch is not yet running Please pull the stem out Wait about 5 seconds before proceeding If the movement is still not running It may be that the battery is dead Please charge it before use Pull out the arbor... - Page 3 2.1: open APP 2.2：Turn on Bluetooth 2.3：Binding watch equipment 2.4：Connect the watch 2.5：Return to the main display 2.6: Bluetooth connection Interface successful Note：The above are the steps when the first mobile phone and watch Bluetooth connection If you need to connect the watch later Watch Bluetooth automatically connects（Picture 2.7） ；If not automatically connected，Refer to Figure 2.8→2.9→2.4→2.5 2.7 Automatic watch connection...
-
Page 4: Mobile Phone App Settings
： part 3 Mobile phone APP settings 3.1:Open the settings page 3.2：Set up call reminder 3.3：Set up SMS alert function 3.4：Set mobile phone APP 3.5：Allow APP to listen 3.6:Allow message monitoring message alert to the message bar 3.6：Set WeChat and other 3.7：Anti-lost settings 3.8：Anti-lost settings... -
Page 5: Step Function
APP messages to remind 3.9：Anti-lost distance setting 3.10：Vibration duration setting Note：The above steps are the settings when the product is used for the first time; After the setting is completed, as long as you do not update the APP, you do not need to set it again. ：Pointer clock timing function part 4 Pull out the stem outward... -
Page 6: Incoming Call Alert Function
Part 6： Incoming call alert function First of all. Make sure the watch is connected to your phone's Bluetooth. If not connected. Please refer to section 2 Bluetooth connection.Please set up a mobile phone call reminder in advance. For details, please refer to the third part of setting up mobile phone APP. -
Page 7: Anti-Lost Alarm Function
The watch's LED goes out and the watch stops vibrating. Part 9：Anti-lost alarm function First of all. Make sure your watch is connected to your phone's Bluetooth. If not connected. See section 2 Bluetooth connection. Please set the anti-lost alert function in advance. For more information, see Setting up Mobile Apps Part 3 1、Please adjust the anti-lost settings of your mobile phone and watch to the proper range. - Page 8 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Need help?
Do you have a question about the SLZ08 and is the answer not in the manual?
Questions and answers