Special Features - Panasonic KX-TR320F Operating Instructions Manual

6

Special Features

6-A Scrambling
(KX-TR325 only)
While using the group code, you do not hear unwanted calls on your
selected channel, but others on the same channel may hear your
conversation. KX-TR325 also allows you to scramble your calls so that
others will not understand your conversation. This is only possible
between Panasonic transceivers. The factory preset is OFF.
1 Press
(MENU)
six times.
≥" SCRAMBLE " and the current setting will
flash on the display.
2 Press
(›) (‹)
or to turn on/off the
scrambling function.
3 Press
(TALK) or wait for 10 seconds
≥The unit will return to the standby mode.
≥When set to ON, " SCRAMBLE " will remain on the display.
≥ If the group code (2-B) is set to "0" (OFF) you cannot turn the
scrambling function ON.
6-B Key Lock
Key lock allows you to lock some buttons ((MENU), (SCAN) and
(›), (‹)) to prevent accidentally changing any transceiver settings.
1 Press and hold
(LOCK)
until " " is
displayed.
2 To turn the key lock function OFF,
(LOCK)
press and hold until " "
disappears.
.
–10–
While Key Lock function is ON, you can still do the following.
≥Receiving/Transmitting ≥Sending call tones
≥Monitor ≥Private talk mode
6-C Auto Power OFF
The unit can be programmed to turn itself off after a certain period of
inactivity. This is useful to preserve the battery life. You can select
the time period for the auto power off mode. The factory preset is "0"
(OFF).
1 Press
(MENU)
five times (seven times
If your model is a KX-TR325).
≥The current setting will flash on the
display.
2 Press
(›) (‹)
or to select the desired
setting (0–3).
≥1: 1 hour
2: 2 hours 3: 3 hours
0: OFF
3 Press
(TALK) or wait for 10 seconds
≥The unit will return to the standby mode.
6-D Backlit LCD Display
The lighted display will remain on for about 5 seconds after pressing
a button except (TALK), or opening and closing the flip.
Section 6
.